Instruction Manual

BT 45
English
9
Working with the ice auger
N Before stepping on the ice, check its
carrying capacity.
N Make sure you have a safe and
secure footing.
WARNING
During operation, always hold the
machine firmly with both hands to
control unexpected reactive forces
caused by the drilling tool jamming in or
penetrating the ice. Release the throttle
trigger if the drilling tool jams.
Working with the planting hole auger
N Make sure you have a safe and
secure footing.
WARNING
During operation, always hold the
machine firmly with both hands to
control unexpected reactive forces that
may occur if the drilling tool jams, e.g. in
rocky ground. Release the throttle
trigger if the drilling tool jams.
The planting hole auger should be
operated only with the gearbox set to
position 1. The tool speed is too high for
drilling planting holes when the gearbox
is set to poistion 2.
Working with a wood drill or twist drill
N Make sure you have a safe and
secure footing.
WARNING
During operation, always hold the
machine firmly with both hands to
control unexpected reactive forces
caused by the drilling tool jamming in or
passing through the wood. Release the
throttle trigger if the drilling tool jams.
Drilling tool jammed
See "Releasing a Trapped Auger".
421BA008 KN
421BA002 KN
421BA009 KN