Instruction Manual

BT 45
English
11
Preparations
N Before fueling, clean the filler cap
and the area around it to ensure that
no dirt falls into the tank.
N Position the machine so that the
filler cap is facing up.
Different markings on filler caps
Filler caps and fuel tanks can be marked
differently.
Depending on the version, filler cap and
fuel tank may be available with or
without markings.
Filler cap without marking
To open:
N Open bracket until it is vertical
N Turn the filler cap counterclockwise
(approx. 1/4 turn)
N Remove the filler cap
Filling with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends using the STIHL
filling system for fuel (special
accessory).
N Fill with fuel
Closing
Bracket is in an upright position:
N Position filler cap – position
markings on the filler cap and the
filler port must be aligned with each
other.
N Push the filler cap down as far as it
will go
Fueling
421BA011 KN
left: Filler cap - without markings
right: Filler cap - with markings on
cap and fuel tank
001BA240 KN
001BA218 KN
001BA219 KN
001BA224 KN
001BA220 KN