Instruction Manual

BT 45
English
13
N Turn filler cap (approx. 1/4 turn)
Markings on filler cap and fuel tank must
align
N Remove the filler cap
Filling with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends using the STIHL
filling system for fuel (special
accessory).
N Fill with fuel
Closing
Bracket is in an upright position:
N Position filler cap – markings on filler
cap and fuel tank must align
N Push the filler cap down as far as it
will go
N Hold the filler cap down and turn it
clockwise until it engages
Then the markings on filler cap and fuel
tank will align
N Close bracket lock
Filler cap is locked
If the filler cap will not lock onto the fuel
tank
The base of the filler cap is twisted in
relation to the upper part.
N Remove the filler cap from the fuel
tank and look at it from above
001BA232 KN
001BA234 KN
001BA237 KN
001BA234 KN
001BA233 KN
001BA231 KN
001BA235 KN
001BA241 KN