Instruction Manual

0456 701 0003 F18 5
► Danger! Clothing that has been
contaminated by combustible or
flammable substances (such as
fuel, oil or grease) must be
changed immediately - fire hazard!
Clean the clothing as instructed
before wearing it again.
Any modifications to the product can
impair the protective effect.
► Therefore do not modify the
product in any way.
► If the product has been modified it
must be disposed of immediately.
Alterations and repair
► Repair like standard outer clothing.
Dispose of product if it suffers
wear.
► If altering or repairing the STIHL
MultiProtect HS trousers, ensure
that the protector pocket is not
sewn up or altered.
► If shortening the sleeves of the
STIHL ADVANCE X-TREEm
jacket, ensure that the Velcro®
fastening on the sleeve is moved
back by a corresponding distance.
Weight
As an example, a size 52 jacket
product number 0000 884 7152
weighs approx. 600 +/- 100 grams.
Other models or sizes will vary
accordingly.
Choosing the correct size
STIHL supplies different sizes and
models of protective clothing:
Jackets in chest size from under
96 cm to over 128 cm. To guarantee
optimum fit and thus optimum safety,
the garments should be selected
according to the wearer’s body
measurements.
Storage and transport
The product is protected during
transport by transport packaging
(plastic bag, box, etc.).
► Store in a well ventilated, dry
place.
► Avoid extreme temperatures,
contact with liquids, and UV
radiation (e.g. shop window).
Spare parts and accessories
Outer fabric, closures, buckles,
protectors and braces for repairing
individual products. The protectors
are inserted into pockets on the
safety work trousers. Instructions on
fitting the protectors to the safety
work trousers are supplied with the
protectors. A combination of different
protectors is possible, but should be
avoided for ergonomic reasons and
to avoid heat build-up.
Information on Table 2:
1)HS leg protector to protect the
thighs and knees from injuries with
the hedge trimmer.
2)FS leg protector to protect the
shins and knees from particles
thrown into the air by the clearing
saw.
3)Knee protector for jobs done while
kneeling.
4)FS braces are flat to avoid any
pressure points being caused by
the shoulder strap. FS braces are
threaded through the loops on the
trousers.