STIHL FC-MM Instruction Manual
English MultiSystem Guide to Using this Manual Safety Precautions and Working Techniques Using the Unit Approved MultiEngines Mounting the MultiTool Starting / Stopping the Engine Storing the Machine Maintenance and Care Minimize Wear and Avoid Damage Main Parts Specifications Maintenance and Repairs Disposal EC Declaration of Conformity 2 2 2 6 7 8 9 9 10 10 11 12 12 13 13 Dear Customer, Thank you for choosing a quality engineered STIHL product.
English MultiSystem Guide to Using this Manual Pictograms All the pictograms attached to the machine are shown and explained in this manual. + Symbols in text WARNING + 469BA028 KN Warning where there is a risk of an accident or personal injury or serious damage to property. In the STIHL MultiSystem, various MultiEngines and MultiTools are combined to form a machine. In this Instruction Manual, the functional unit of MultiEngine and MultiTool is referred to as a machine.
English The deflector on this power tool cannot protect the operator from all objects thrown by the attachment (stones, glass, wire, etc.). Ejected objects may also ricochet and strike the operator. Never attempt to modify your power tool in any way since this may increase the risk of personal injury. STIHL excludes all liability for personal injury and damage to property caused while using unauthorized attachments. Do not use a high-pressure washer to clean the power tool.
English the attachment still rotates when the engine is idling, have your dealer check your machine and make proper adjustments or repairs – see MultiEngine user manual. 469BA045 KN See also notes on "Mounting the MultiTool". Always hold the unit firmly with both hands on the handles. Right hand on control handle, left hand on grip on handlebar. While working If you use metal tools, position the gearbox so that the axle is below the drive shaft.
English Be extremely cautious when pulling the power tool towards you because of the risk of injury from contact with the rotating attachment. Make sure you always have good balance and secure footing. Be extremely cautious when changing direction with the power tool – especially on slopes. On slopes, always work parallel to the gradient to reduce the risk of injury from slipping or contact with the attachment.
English MultiEngine instruction manuals. Have all other work performed by a servicing dealer. Using the Unit 481BA002 KN STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer. STIHL dealers are regularly given the opportunity to attend training courses and are supplied with the necessary technical information. Operate the MultiEngine with FC-MM edger in the forward direction only.
English Edging Approved MultiEngines Only use MultiEngines supplied by STIHL or expressly approved by STIHL for use with the MultiTool. 1 90° 481BA005 KN This MultiTool may only be used in combination with the STIHL MM 56 MultiEngine. Secure the handlebar in the normal operating position. N Start the engine. N Start the cut at no less than half throttle and continue cutting at full throttle. N Hold and guide your edger so that the blade is vertical.
English Mounting the MultiTool 2 Removing Existing MultiTools NOTICE It must not be possible to rotate the gearbox on the drive tube. 3 WARNING Wear gloves to reduce the risk of injury from contact with sharp MultiTools and/or hot surface of gearbox. 469BA043 KN 1 The axle (1) must be below the shaft (2). Direction of rotation (3) of MultiTool. Mounting the MultiTool The direction of rotation is marked with arrows on the gearbox and cutting blade. Make sure the arrows point in the same direction.
English N Starting / Stopping the Engine Starting the Engine N Always follow the starting procedure described in the MultiEngine instruction manual. Check that the MultiTool is not touching the ground or any other obstacles. The unit must rest on the engine flange and the support on the frame. Make sure you have good balance and secure footing – as shown in the illustration.
English Maintenance and Care The following intervals apply to normal operating conditions only. If your daily working time is longer or operating conditions are difficult (very dusty work area, etc.), shorten the specified intervals accordingly. All accessible screws and nuts N Retighten if necessary Minimize Wear and Avoid Damage Observing the instructions in this manual and the MultiEngine manual helps reduce the risk of unnecessary wear and damage to the power tool.
English Main Parts 1 2 3 4 5 Blade Sleeve Wheel Washer Hitch pin 5 2 FC-MM 3 4 481BA009 KN 1 11
English The K-factor in accordance with Directive 2006/42/EC is 2.0 dB(A) for the sound pressure level and sound power level; the K-factor in accordance with Directive 2006/42/EC is 2.0 m/s2 for the vibration level. Specifications Attachment Blade Diameter: 230 mm Weight Edger with wheel: 0.8 kg Noise and vibration data measurements on power tools with the FC-MM MultiTool include idling and rated maximum speed with the same duration of exposure.
English Disposal EC Declaration of Conformity ANDREAS STIHL AG & Co. KG Badstr. 115 D-71336 Waiblingen Observe all country-specific waste disposal rules and regulations. Done at Waiblingen, 03.02.2020 ANDREAS STIHL AG & Co. KG pp Germany 000BA073 KN declare under our sole responsibility that STIHL products must not be thrown in the garbage can. Take the product, accessories and packaging to an approved disposal site for environmentfriendly recycling.
0458-481-0121 englisch G www.stihl.
