Owner's Manual

13FCS
English / USA
: Always walk forwards when cutting,
do not pull the unit towards you.
: Cut at a steady pace to avoid having
to make several passes.
1 = Gunning sight for cutting blade.
This attachment may be used only in
combination with the following basic
power tools:
STIHL FC 83, STIHL FC 85,
STIHL FC 110, STIHL FH 75,
STIHL FS 83
1)
, STIHL FS 85
1)2)
,
STIHL FS 90
1)
, STIHL FS 110
1)2)
,
STIHL HL 73
1)
, STIHL HL 75
1)
,
STIHL HL 100
1)
and STIHL KW 85.
1)
Not approved for mounting to
HL 73 K, HL 75 K and HL 100 K or
HL 73-0°, HL 75-0°, and HL 100-0°
without loop handle.
2)
Not approved for FS 85 RX,
FS 100 RX and FS 110 RX.
Other combinations of the
attachment and basic power tools
are not permitted because of the
risk of accidents and injury.
Retrofitting Loop Handle
The following power tool models are
approved for use with this attachment
when equipped with a loop handle:
HL 73-0°, HL 75-0°, HL 100-0°
: To retrofit the loop handle see
"Mounting the Loop Handle".
It is not necessary to mount a barrier
bar to the loop handle. The barrier
bar is market-specific and available
as a special accessory.
245BA009 KN
1
Approved Basic Power
Tools