Instruction Manual

FH
English
11
WARNING
To reduce the risk of injury, never touch
the blades while making adjustments.
N Pull back the sliding sleeve (1) and
use the lever (2) to adjust the joint
by one or several holes.
N Release the sliding sleeve (1) and
make sure the lock pin engages the
quadrant (3).
Transport Position
The cutter bar can be folded flat against
the drive tube and locked in position to
save space during transportation.
WARNING
To reduce the risk of injury, always shut
off the engine – depress stop switch –
and fit the blade scabbard before
moving the cutter bar to the transport
position or from the transport position to
the normal working position.
WARNING
The gearbox gets hot during operation.
To reduce the risk of burn injury, do not
touch the gearbox.
N Shut off the engine.
N Fit the blade scabbard.
N Pull back the sliding sleeve (1) and
use the lever (2) to swing the joint
upwards – in direction of drive tube
– until the cutter bar is flat against
the drive tube.
N Release the sliding sleeve (1) and
make sure the lock pin engages the
quadrant (3).
0000-GXX-1684-A0
3
2
1
0000-GXX-1685-A0
0000-GXX-1686-A0
1
2
3