Instruction Manual

FH
English
13
Disconnecting Machine from Harness
N Press down the bar on the
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
Throwing Off the Machine
WARNING
The machine must be quickly thrown off
in the event of imminent danger.
Practice removing and putting down the
machine as you would in an emergency.
To avoid damage, do not throw the unit
to the ground when practicing.
Practice quickly detaching the power
tool from the carabiner as described
under "Disconnecting Machine from
Harness".
If you are using a shoulder strap:
Practice slipping the strap off your
shoulder.
If you are using a full harness: Practice
quickly opening the locking plate and
slipping the harness straps off your
shoulders.
Starting the Engine
Always follow the starting procedure
described in the basic power tool
instruction manual.
N Position the unit securely for
starting: It must rest on the machine
support and the blade gearbox.
N On units with adjustable cutter bar:
Set the cutter bar to the straight (0°)
position.
N Remove the blade scabbard. Check
that the cutting blades are not
touching the ground or any other
obstacles. If necessary, rest the
gearbox on a raised support (e.g.
mound, brick or something similar).
002BA661 KN
2
1
1
1
2
2
Starting / Stopping the
Engine
002BA038 KN
002BA072 KN