Instruction Manual
Table Of Contents
- STIHL FS 45
- 1 Guide to Using this Manual
- 2 Safety Precautions and Working Techniques
- 2.1 Clothing and equipment
- 2.2 Transporting the machine
- 2.3 Refueling
- 2.4 Before starting
- 2.5 Starting the engine
- 2.6 Holding and guiding the machine
- 2.7 While working
- 2.8 Vibrations
- 2.9 Maintenance and Repairs
- 2.10 Cutting Attachments and Deflectors
- 2.11 Mowing Head with Nylon Lines
- 2.12 STIHL PolyCut 6-3 Mowing Head with Polymer Blades
- 3 Approved Combinations of Cutting Attachment, Deflector, Handle and Harness
- 4 Mounting the Loop Handle
- 5 Mounting the Deflector
- 6 Mounting the Cutting Attachment
- 7 Fuel
- 8 Fueling
- 9 Starting / Stopping the Engine
- 10 Operating Instructions
- 11 Cleaning the Air Filter
- 12 Adjusting the Carburetor
- 13 Spark Plug
- 14 Engine Running Behavior
- 15 Storing the Machine
- 16 Maintaining the Mowing Head
- 17 Inspections and Maintenance by Dealer
- 18 Maintenance and Care
- 19 Main Parts
- 20 Specifications
- 21 Maintenance and Repairs
- 22 Disposal
- 23 EC Declaration of Conformity
WARNING
After fueling, tighten down the filler cap as
securely as possible by hand.
9 Starting / Stopping the
Engine
9.1 Controls
2
232BA080 KN
1
6
7
5
4
3
1 Stop switch
2 Throttle trigger lockout
3 Throttle trigger
4 Tongue of throttle trigger
5 Catch
9.1.1 Positions of stop switch
6 Run I
7 Stop 0
9.2 Starting
233BA047 KN
4
► Move the stop switch to I.
► Press down the throttle trigger lockout and
hold it there.
► Squeeze the throttle trigger until the catch on
the tongue (4) can be engaged on the housing
(arrow).
► Now release the throttle trigger, tongue and
trigger lockout in that order. This is the starting
throttle position.
9 Starting / Stopping the Engine English
0458-232-8321-F 15