Instruction Manual
Table Of Contents
- STIHL FS 45
- 1 Guide to Using this Manual
- 2 Safety Precautions and Working Techniques
- 2.1 Clothing and equipment
- 2.2 Transporting the machine
- 2.3 Refueling
- 2.4 Before starting
- 2.5 Starting the engine
- 2.6 Holding and guiding the machine
- 2.7 While working
- 2.8 Vibrations
- 2.9 Maintenance and Repairs
- 2.10 Cutting Attachments and Deflectors
- 2.11 Mowing Head with Nylon Lines
- 2.12 STIHL PolyCut 6-3 Mowing Head with Polymer Blades
- 3 Approved Combinations of Cutting Attachment, Deflector, Handle and Harness
- 4 Mounting the Loop Handle
- 5 Mounting the Deflector
- 6 Mounting the Cutting Attachment
- 7 Fuel
- 8 Fueling
- 9 Starting / Stopping the Engine
- 10 Operating Instructions
- 11 Cleaning the Air Filter
- 12 Adjusting the Carburetor
- 13 Spark Plug
- 14 Engine Running Behavior
- 15 Storing the Machine
- 16 Maintaining the Mowing Head
- 17 Inspections and Maintenance by Dealer
- 18 Maintenance and Care
- 19 Main Parts
- 20 Specifications
- 21 Maintenance and Repairs
- 22 Disposal
- 23 EC Declaration of Conformity
3 Approved Combinations of Cutting Attachment, Deflector, Han‐
dle and Harness
Cutting attachment Deflector Handle Carrying strap
0000-GXX-0401-A4
1
6
7
5
2
3
4
3.1 Permissible combinations
Choose the correct combination from the table
depending on the cutting tool!
WARNING
For safety reasons no other combinations are
permitted – risk of accidents!
3.2 Cutting attachments
3.2.1 Mowing heads
1 STIHL AutoCut C 6-2
2 STIHL DuroCut 5-2
3 STIHL PolyCut 7-3
4 STIHL PolyCut 6-2
3.3 Deflector
5 Guard with blade for mowing heads
3.4 Handle
6 Loop handle
3.5 Carrying strap
7 Shoulder strap can be used
4 Mounting the Loop Handle
The loop handle comes in two different versions.
4.1 Version A
223BA017 KN
223BA018 KN
► Place the friction liner in the loop handle.
3 Approved Combinations of Cutting Attachment, Deflector, Handle and Harness English
0458-232-8321-F 9