Instruction Manual

17FS 45, FS 46

English / USA

: Place friction liner in the loop handle : Fit the loop handle (1) on the drive

tube, approx. 20 cm (8 in) (A)

forward of the control handle (2).

: Push the spacer (3) (not all markets)

into the loop handle until it fits

snugly.

: Insert the screw (4) through the loop

handle and the spacer so that the

screw head locates in the hexagon

recess.

: Fit the washer (5) and wingnut (6)

and tighten down firmly.

Adjusting loop handle to most

comfortable position

: Loosen the wingnut (6).

: Slide or rotate the loop handle (1) on

the drive tube as required.

: Tighten the wingnut (6).

Mounting the Loop Handle

223BA017 KN

223BA018 KN

232BA069 KN