Owner's Manual

FS 56, FS 56 R, FS 56 C, FS 56 RC
English
21
N Position the deflector against the
gearbox so that the lug (3) engages
the recess (4) in the deflector.
N Insert the screw (5) and tighten it
down firmly.
On some versions the M5x14 screw is
packed loose with the deflector.
Preparations
N Lay your trimmer on its back so that
the cutting attachment mounting
face is pointing up.
Fitting the thrust plate
The machine comes standard with the
thrust plate.
N Slip the thrust plate (1) over the
shaft (2).
The thrust plate on the gearbox is
necessary for mounting cutting tools.
Mounting hardware for cutting
attachments
The mounting hardware supplied
depends on the cutting attachment that
comes as original equipment with the
new machine.
Mounting hardware is not packed with
machine
Only mowing heads may be used which
mount directly to the shaft (2).
Mounting hardware is packed with
machine
Mowing heads and metal cutting tools
may be mounted.
0414BA007 KN
Mounting the Cutting
Attachment
002BA104 KN
002BA265 KN
1
2
002BA266 KN