Instruction Manual

FS 70 C, FS 70 RC
English
13
Mounting the control handle
N Take out the screw (1) – the nut (2)
remains in the control handle (3).
N Push the control handle onto the
handlebar (5) until the holes (6) line
up – the throttle trigger (4) must
point towards the gearbox.
N Insert the screw (1) and tighten it
down firmly.
Aligning and securing the handlebar
N Align the handlebar so that
distance (A) is about 20 cm (8 in)
and distance (B) about 15 cm (6 in).
N Tighten down the screws (1) firmly
in a crosswise pattern
Fitting the throttle cable
NOTICE
Do not kink the throttle cable or lay it in
tight radii – make sure the throttle trigger
moves freely.
N Position the throttle cable holder (2)
and throttle cable (1) on the drive
tube
N Press the gas throttle holder (2)
together. The gas throttle holder (2)
snaps into place.
3
6
547BA027 KN
1
2
4
6
5
A
1
B
002BA275 KN
2
1
1
2
002BA276