Operation Manual

FS 70 R
English
27
Engine does not start in warm start
position <
N Move the choke lever to g and
continue cranking until the engine
runs.
If the engine does not start
N Check that all settings are correct.
N Check that there is fuel in the tank
and refuel if necessary.
N Check that the spark plug boot is
properly connected.
N Repeat the starting procedure.
Engine is flooded
N Move the choke lever to F and
continue cranking until the engine
runs.
Fuel tank run until completely dry
N After refueling, press the manual
fuel pump bulb (P) at least
five times – even if the bulb is filled
with fuel.
N Set the choke lever to suit the
engine temperature.
N Now start the engine.
Using transport guard
The type of transport guard depends on
the metal cutting attachment supplied
with the machine. Transport guards are
available as special accessories.
230 mm Grass Cutting Blades
Transporting the Unit
681BA268 KN
681BA269 KN
681BA270 KN
681BA272 KN