Owner's Manual

FS 90, FS 90 R
English
25
Fitting the Skirt and Blade
N Slide the lower guide slot of the skirt
(4) onto the deflector (1) – it must
snap into position.
N Push the blade (5) into the upper
guide slot on the skirt and line it up
with the first hole.
N Insert the screw and tighten it down
firmly.
Mounting the Limit Stop
N Position the limit stop (6) on the
gearbox flange.
N Insert the screws (7) and tighten
them down firmly.
Preparations
N Lay your brushcutter on its back so
that the cutting attachment
mounting face is facing up.
Mounting hardware for cutting
attachments
The mounting hardware supplied
depends on the cutting attachment that
comes as original equipment with the
new machine.
Mounting hardware is not packed
with machine
Only mowing heads can be mounted.
These parts must be fitted to the
deflector (1) when you use a
mowing head.
4
1
5
4
002BA103 KN
Always fit the limit stop (6) when
you use a circular saw blade.
7
002BA382 KN
6
Mounting the Cutting
Attachment
002BA104 KN