Owner's Manual

STIHL FS 94 R
English
16
Approved Combinations
The complete combination includes:
– Cutting attachment
– Deflector
– Handle
– Harness
Select correct combination from the
table according to the cutting
attachment you intend to use. Read the
table horizontally from left to right.
Cutting Attachments
Mowing heads
1 STIHL SuperCut 20-2 mowing head
2 STIHL AutoCut 25-2 mowing head
3 STIHL TrimCut 31-2 mowing head
4 STIHL DuroCut 20-2 mowing head
5 STIHL FixCut 25-2 mowing head
6 STIHL FixCut 30-2 mowing head
7 STIHL PolyCut 20-3 mowing head
Metal cutting attachments
8 Grass cutting blade 230-4
9 Grass cutting blade 230-8
WARNING
Non-metal grass cutting blades are not
approved.
Deflectors
10 Deflector with blade for mowing
heads only
11 Deflector with
12 Skirt and blade for all mowing heads
(see "Mounting the Deflector")
13 Deflector without skirt and blade for
all metal mowing attachments
Handles
14 Loop handle
15 Loop handle with
16 Barrier bar
Harnesses
17 Shoulder strap may be used
18 Shoulder strap must be used
19 Full harness may be used
WARNING
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of
control and contact with the cutting
attachment: use grass cutting metal
blades on this unit only if equipped with
a bike handle or a loop handle with
barrier bar.
Do not use rigid plastic blades, brush
knifes or circular saw blades on this unit.
Using the Barrier Bar
A barrier bar may have to be mounted to
the loop handle to suit the market and
the cutting attachment you intend to use
– see "Approved Combinations of
Cutting Attachment, Deflector, Handle
and Harness".
The barrier bar comes standard with the
machine or is available as a special
accessory.
Mounting the Loop Handle
002BA571 KN