Owner's Manual

STIHL FS 94 R
English
18
Adjusting and Securing the Loop Handle
The loop handle can be adjusted to suit
the height and reach of the operator and
the application by changing
distance (A).
Recommendation: distance (A):
about 30 cm (12 in)
N Slide the handle to the required
position.
N Line up the loop handle (4).
N Tighten down the screws so that the
handle cannot be rotated on the
drive tube.
Use the Right Deflector
WARNING
Deflector (A) with skirt and blade is only
approved for mowing heads.
WARNING
Deflector (B) without skirt and blade is
only approved for grass cutting blades.
WARNING
Deflector (C) with blade is only approved
for mowing heads.
Mounting the Deflector
All deflectors are mounted to the
gearbox in the same way.
N Position deflector (1) or (2) on the
gearbox.
N Insert the screws (3) and tighten
them down firmly.
4
002BA570 KN
A
Mounting the Deflector
A
002BA572 KN
B
002BA573 KN
C
002BA574 KN
002BA380 KN
2
1
3
3