Owner's Manual

STIHL FS 94 R
English
19
Fitting the Skirt and Blade
WARNING
These parts must be fitted to the
deflector (1) when you use a mowing
head.
N Slide the lower guide slot of the skirt
(4) onto the deflector (1) – it must
snap into position.
N Push the blade (5) into the upper
guide slot on the skirt and line it up
with the first hole.
N Insert the screw and tighten it down
firmly.
Preparations
N Lay your trimmer on its back so that
the cutting attachment mounting
face is pointing up.
Fitting the Thrust Plate
The machine comes standard with the
thrust plate.
N Slip the thrust plate (1) over the
shaft (2).
NOTICE
The thrust plate (1) on the gearhead is
necessary for mounting cutting
attachments.
Mounting Hardware for Cutting
Attachments
The mounting hardware supplied
depends on the cutting attachment that
comes as original equipment with the
new machine.
If mounting hardware is not packed with
machine
Only mowing heads may be used which
mount directly to the shaft (2).
If mounting hardware is packed with
machine
Mowing heads and metal cutting
attachments may be mounted.
4
1
5
4
002BA103 KN
Mounting the Cutting
Attachment
1191BA026 KN
1
002BA383 KN
2
002BA266 KN