Owner's Manual

STIHL FS 94 R
English
24
The type and style of the harness
depend on the market.
The use of the shoulder strap is
described in the chapter on "Approved
Combinations of Cutting Attachment,
Deflector, Handle and Harness".
Shoulder strap
N Put on the shoulder strap (1).
N Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
N Balance the machine.
Full Harness
N Put on the full harness (1).
N Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
N Balance the machine.
The type and style of the harness and
carabiner (spring hook) depend on the
market.
Attaching machine to shoulder strap
N Attach the carabiner (1) to the
carrying ring (2) on the drive tube.
Floating position
N Mowing heads and grass cutting
blades should just touch the ground.
The correct floating position is obtained
as follows:
Fitting the Harness
1
1191BA012 KN
2
1191BA020 KN
1
3
2
Balancing the
Trimmer/Brushcutter
1
2
1
2
002BA387 KN
1191BA021 KN