Owner's Manual

STIHL FS 94 R
English
33
STIHL PolyCut Mowing Head
Always check the mowing head for signs
of wear before installing new cutting
blades.
WARNING
If there are signs of serious wear,
replace the complete mowing head.
The thermoplastic cutting blades are
referred to as "blades" in the following.
The mowing head is supplied with
illustrated instructions for replacing the
blades. Keep the instructions for the
mowing head in a safe place.
Preparing the machine for installation of
new blades
N Shut off the engine.
WARNING
To reduce the risk of injury, always shut
off the engine before refilling the mowing
head by hand.
N Position your trimmer so that the
mowing head (1) faces up.
N Remove the mowing head.
N Replace blades are shown in the
illustrated instructions.
N Mount the mowing head on the
machine.
Throttle Cable
Checking adjustment of throttle cable
Error: Engine speed increases when
only the throttle trigger is depressed.
N Start the engine.
N Depress the throttle trigger (1) – do
not press down the throttle trigger
lockout (2).
If the engine speed increases or if the
cutting attachment rotates, the throttle
cable has to be adjusted.
N Shut off the engine.
N Have throttle cable adjusted by your
dealer. STIHL recommends an
authorized STIHL servicing dealer.
Replacing the Cutting Blade
1191BA026 KN
Inspection and Maintenance
by User
2
1191BA023 KN
1