Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Main Parts
- 4 Safety Symbols on the Products
- 5 IMPORTANT SAFETY INSTRUCTIONS
- 6 Maintenance, Repair and Storage
- 7 Battery Safety
- 8 Before Starting Work
- 9 Charging the Battery
- 10 LED Diagnostics and Acoustic Signals
- 11 Assembling the Trimmer / Brushcutter
- 12 Using a Battery Harness
- 13 Adjusting the Trimmer / Brushcutter
- 14 Inserting and Removing the Connecting Cord
- 15 Switching the Trimmer / Brushcutter On and Off
- 16 Checking the Power Tool
- 17 During Operation
- 18 After Finishing Work
- 19 Transporting
- 20 Storing
- 21 Cleaning
- 22 Inspection and Maintenance
- 23 Troubleshooting Guide
- 24 Specifications
- 25 Approved Deflector, Cutting Attachment, Handle and Harness Combinations
- 26 Replacement Parts and Equipment
- 27 Disposal
- 28 Limited Warranty
- 29 Trademarks
- 30 Addresses
- 1 Introducción
- 2 Acerca de este manual de instrucciones
- 3 Componentes importantes
- 4 Símbolos de seguridad en los productos
- 5 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- 6 Mantenimiento, reparación y almacenamiento
- 7 Seguridad de la batería
- 8 Antes de empezar a trabajar
- 9 Carga de la batería
- 10 Diagnóstico por LED y señales acústicas
- 11 Armado de la motoguadaña / desmalezadora
- 12 Uso de un arnés para batería
- 13 Ajuste de la motoguadaña / desmalezadora
- 14 Inserción y retiro del cable de conexión
- 15 Encendido y apagado de la motoguadaña / desmalezadora
- 16 Comprobación de la herramienta motorizada
- 17 Durante el funcionamiento
- 18 Después de completar el trabajo
- 19 Transporte
- 20 Almacenamiento
- 21 Limpieza
- 22 Inspección y mantenimiento
- 23 Guía de solución de problemas
- 24 Especificaciones
- 25 Combinaciones aprobadas de deflector, accesorio de corte, mango y arnés
- 26 Piezas y equipos de repuesto
- 27 Eliminación
- 28 Garantía limitada
- 29 Marcas comerciales
- 30 Direcciones
0458-725-8621-B
20
English
6 Maintenance, Repair and Storage
WARNING
■ Improper use of a grass cutting blade may cause it to
crack, chip or shatter. Thrown blade fragments may
seriously or fatally injure the operator or bystanders. To
reduce the risk of injury:
– Avoid contact with hard or solid foreign objects such
as stones, glass, rocks or pieces of metal.
– Inspect the grass cutting blade at regular, short
intervals for signs of damage. Do not continue
working with a damaged grass cutting blade.
– Resharpen the grass cutting blade regularly as
described on its packaging or instruction leaflet.
– Never attempt to cut woody material with the grass
cutting blade.
5.8.4 Using a Brush Knife
► When working with a brush knife, sweep the trimmer in a
controlled manner, parallel to the ground in front of you.
To reduce the risk of kickout, use the left side of the cutting
blade.
A brush knife is suitable for applications ranging from cutting
matted grass to clearing weeds, wild growth and scrub
brush.
WARNING
■ Improper use of a brush knife may cause it to crack, chip
or shatter. Thrown blade fragments may seriously or
fatally injure the operator or bystanders. To reduce the
risk of injury:
– Avoid contact with hard or solid foreign objects such
as stones, glass, rocks or pieces of metal.
– Inspect the brush knife at regular short intervals for
signs of damage. Do not continue working with a
damaged brush knife.
– Resharpen the brush knife regularly as described on
its packaging or instruction leaflet.
– When cutting young saplings or other woody
materials up to 0.8 in. (2 cm) in diameter, use the left
side of the cutting knife to avoid "kickout" situations.
– Never attempt to cut woody material with a larger
diameter, since the brush knife may catch or jerk the
unit forward.
6.1 Warnings and Instructions
WARNING
■ There are no user-authorized repairs for the power tool.
To reduce the risk of fire, electric shock or other personal
injury and property damage:
– Users may carry out only the cleaning and
maintenance operations described in this manual.
– Strictly follow the cleaning and maintenance
instructions in the appropriate sections of this
instruction manual.
– Never attempt to repair a damaged or broken cutting
attachment. This may cause broken parts to come
off and result in serious or fatal injuries.
– Wear non-slip, heavy-duty work gloves when
handling metal cutting attachments.
0000-GXX-3916-A0
6 Maintenance, Repair and Storage