Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Main Parts
- 4 Safety Symbols on the Products
- 5 IMPORTANT SAFETY INSTRUCTIONS
- 6 Maintenance, Repair and Storage
- 7 Battery Safety
- 8 Before Starting Work
- 9 Charging the Battery
- 10 LED Diagnostics and Acoustic Signals
- 11 Assembling the Trimmer / Brushcutter
- 12 Using a Battery Harness
- 13 Adjusting the Trimmer / Brushcutter
- 14 Inserting and Removing the Connecting Cord
- 15 Switching the Trimmer / Brushcutter On and Off
- 16 Checking the Power Tool
- 17 During Operation
- 18 After Finishing Work
- 19 Transporting
- 20 Storing
- 21 Cleaning
- 22 Inspection and Maintenance
- 23 Troubleshooting Guide
- 24 Specifications
- 25 Approved Deflector, Cutting Attachment, Handle and Harness Combinations
- 26 Replacement Parts and Equipment
- 27 Disposal
- 28 Limited Warranty
- 29 Trademarks
- 30 Addresses
- 1 Introducción
- 2 Acerca de este manual de instrucciones
- 3 Componentes importantes
- 4 Símbolos de seguridad en los productos
- 5 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- 6 Mantenimiento, reparación y almacenamiento
- 7 Seguridad de la batería
- 8 Antes de empezar a trabajar
- 9 Carga de la batería
- 10 Diagnóstico por LED y señales acústicas
- 11 Armado de la motoguadaña / desmalezadora
- 12 Uso de un arnés para batería
- 13 Ajuste de la motoguadaña / desmalezadora
- 14 Inserción y retiro del cable de conexión
- 15 Encendido y apagado de la motoguadaña / desmalezadora
- 16 Comprobación de la herramienta motorizada
- 17 Durante el funcionamiento
- 18 Después de completar el trabajo
- 19 Transporte
- 20 Almacenamiento
- 21 Limpieza
- 22 Inspección y mantenimiento
- 23 Guía de solución de problemas
- 24 Especificaciones
- 25 Combinaciones aprobadas de deflector, accesorio de corte, mango y arnés
- 26 Piezas y equipos de repuesto
- 27 Eliminación
- 28 Garantía limitada
- 29 Marcas comerciales
- 30 Direcciones
0458-725-8621-B
59
English
29 Trademarks
Subsection COVERAGE BY STIHL INCORPORATED,
see above. If any such part fails during the period of
warranty coverage, it must be repaired or replaced by the
manufacturer according to Subsection (4) below. Any
such part repaired or replaced under the warranty must be
warranted for the remaining warranty period.
2)Any warranted part that is scheduled only for regular
inspection in the written instructions required by the
Emission Warranty parts List (see below) must be
warranted for the warranty period defined in Subsection
COVERAGE BY STIHL INCORPORATED, see above. A
statement in such written instructions to the effect of
“repair or replace as necessary” will not reduce the period
of warranty coverage. Any such part repaired or replaced
under warranty must be warranted for the remaining
period.
3)Any warranted part that is scheduled for replacement as
required maintenance in the written instructions required
by the Emission Warranty Parts List (see below) must be
warranted for the period of time prior to the first scheduled
replacement point for that part. If the part fails prior to the
first scheduled replacement, the part must be repaired or
replaced by the zero emission equipment motor
manufacturer according to Subsection (4) below. Any
such part repaired or replaced under warranty must be
warranted for the remainder of the period prior to the first
scheduled replacement point for the part.
4)Repair or replacement of any warranted part under the
warranty must be performed at a warranty station at no
charge to the owner.
5)Notwithstanding the provisions of Subsection (4) above,
warranty services or repairs will be provided at all
manufacturer distribution centers that are authorized to
service the subject zero emission equipment motor.
6)The owner must not be charged for diagnostic labor that
leads to the determination that a warranted part is in fact
defective, provided that such diagnostic work is performed
at a warranty station.
WARRANTY WORK
STIHL Incorporated shall remedy warranty defects at any
authorized STIHL dealer or warranty station. Any such work
shall be free of charge to the owner if it is determined that a
warranted part is defective. Any manufacturer approved or
equivalent replacement part may be used for any warranty
maintenance or repairs on emission-related parts and must
be provided without charge to the owner. STIHL
Incorporated is liable for damages to other zero emission
equipment motor components caused by the failure of a
warranted part still under warranty.
EMISSION WARRANTY PARTS LIST
Motor, Battery, Battery Charger, Motor Controller
WHERE TO MAKE A CLAIM FOR WARRANTY SERVICE
Bring the STIHL product to any authorized STIHL dealer.
LIMITATIONS
The repair or replacement of any warranted part otherwise
eligible for warranty coverage may excluded from such
warranty coverage if STIHL Incorporated demonstrates that
the STIHL product has been abused, neglected, or
improperly maintained, and that such abuse, neglect, or
improper maintenance was the direct cause of the need for
repair or replacement of the part. That notwithstanding, any
adjustment of a component that has a factory installed, and
properly operating, adjustment limiting device is still eligible
for warranty coverage.
29.1 Registered Trademarks
29 Trademarks
STIHL
®
FARM BOSS
®
iCademy
®
MAGNUM
®