Instruction Manual

FSA 65, FSA 85
English
12
Working with bump guard
The bump guard comes standard with
the FSA 85. It is available as a special
accessory for the FSA 65.
The bump guard (1)
– Limits the cutting range of the
mowing line
– reduces the risk of the rotating
mowing line causing damage (e.g.
tree bark)
WARNING
The mowing head may continue to
rotate briefly after you switch off your
power tool – wait for the mowing head to
come to a standstill before adjusting the
bump guard – do not adjust it with your
foot.
Disposal
N Do not throw cuttings into the
garbage can – they can be
composted.
Cutting attachment
The trimmer comes from the factory with
the AutoCut C 4-2 mowing head already
fitted. For safety reasons no other
cutting attachments may be mounted to
the trimmer.
Deflector
The trimmer is supplied with a deflector.
Only this deflector may be mounted to
the trimmer – no other deflectors are
permitted. For further information see
"Mounting the Deflector".
WARNING
Use only the provided deflector in order
to reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
provided handle in order to reduce the
risk of injury from loss of control and
contact with the cutting attachment.
Do not use rigid polymer blades, metal
cutting attachments or circular saw
blades on this unit.
Only the provided mowing head may be
used.
1
3905BA003 KN
Approved Combinations of
Cutting Attachment and
Deflector
3905BA004 KN