Instruction Manual

FSA 65, FSA 85
English
13
Your new power tool comes with the
loop handle mounted on the shaft, but it
must be turned and lined up to suit your
requirements.
N Loosen the star knob (1) on the
handle.
N Turn the handle to the vertical
position.
The loop handle can be adjusted to suit
the height and reach of the operator and
the application by changing
distance (A).
Recommendation: distance (A):
about 4.0 in
N Slide the handle to the required
position.
N Tighten down the star knob so that
the handle cannot be rotated on the
shaft.
N Position your trimmer so that the
mowing head (1) faces up.
The motor housing has guide slots
(arrows) to correctly locate the deflector.
N Push the deflector (2) into the guide
slots as far as stop.
N Insert the screws (3) and tighten
them down firmly.
Adjusting the Loop Handle
1
3905BA005 KN
3905BA006 KN
3905BA007 KN
A
Mounting the Deflector
1
3905BA008 KN
3
2
3
3905BA009 KN