Instruction Manual

FSA 65, FSA 85
English
18
N Make sure the cutting attachment is
not touching the ground or any other
objects.
N Hold the power tool with both hands
– one hand on the control handle –
one hand on the loop handle.
N Unlock the power tool by moving the
retaining latch (2) to ‚.
N Push down the trigger switch
lockout (3) and depress the trigger
switch (4) and hold them in that
position.
The motor runs only if the retaining
latch (2) is on ‚ and the trigger switch
lockout (3) and trigger switch (4) are
operated simultaneously.
Trigger
Motor speed can be controlled with the
trigger switch. Motor speed is increased
progressively by squeezing the trigger
switch (FSA 85 only).
N Release the trigger switch
lockout (1) and the trigger
switch (2).
N Move the retaining latch (3) to ƒ –
the trigger switch (2) cannot be
operated – the power tool is locked
to prevent start-up.
Always remove the battery from the
power tool during work breaks and after
finishing work.
2
3905BA012 KN
4
3
2
3905BA013 KN
Switching Off
2
1
3905BA014 KN
3
3905BA015 KN
2