Instruction Manual
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Gerätebeschreibung
- 4. Zu Ihrer Sicherheit
- 5. Symbolbeschreibung
- 6. Lieferumfang
- 7. Gerät betriebsbereit machen
- 8. Hinweise zum Arbeiten
- 9. Sicherheitseinrichtungen
- 10. Gerät in Betrieb nehmen
- 11. Wartung
- 12. Transport
- 13. Verschleiß minimieren und Schäden vermeiden
- 14. Übliche Ersatzteile
- 15. Umweltschutz
- 16. EU- Konformitätserklärung
- 17. Technische Daten
- 18. Fehlersuche
- 19. Serviceplan
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Preparing the machine for operation
- 8. Notes on working with the machine
- 9. Safety devices
- 10. Operating the machine
- 11. Maintenance
- 12. Transport
- 13. Minimising wear and preventing damage
- 14. Standard spare parts
- 15. Environmental protection
- 16. EU - Declaration of conformity
- 17. Technical specifications
- 18. Troubleshooting
- 19. Service schedule
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Description de l’appareil
- 4. Consignes de sécurité
- 5. Signification des pictogrammes
- 6. Contenu de l’emballage
- 7. Préparation de l’appareil
- 7.1 Montage de la rallonge d’éjection
- 7.2 Montage des roues et du châssis
- 7.3 Montage du volet d’éjection
- 7.4 Ouverture et fermeture du volet d’éjection
- 7.5 Montage du disque porte- couteaux
- 7.6 Démontage du disque porte- couteaux
- 7.7 Montage de l’entonnoir de remplissage
- 7.8 Démontage de l’entonnoir de remplissage
- 7.9 Carburant et huile moteur
- 8. Conseils d’utilisation
- 9. Dispositifs de sécurité
- 10. Mise en service de l’appareil
- 11. Entretien
- 12. Transport
- 13. Comment limiter l’usure et éviter les dommages
- 14. Pièces de rechange courantes
- 15. Protection de l’environnement
- 16. Déclaration de conformité UE
- 17. Caractéristiques techniques
- 18. Recherche des pannes
- 19. Feuille d’entretien
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Beschrijving van het apparaat
- 4. Voor uw veiligheid
- 5. Toelichting van de symbolen
- 6. Leveringsomvang
- 7. Apparaat klaarmaken voor gebruik
- 8. Aanwijzingen voor werken
- 9. Veiligheidsvoorzieningen
- 10. Apparaat in gebruik nemen
- 11. Onderhoud
- 12. Transport
- 13. Slijtage minimaliseren en schade voorkomen
- 14. Standaard reserveonderdelen
- 15. Milieubescherming
- 16. EU- conformiteitsverklaring
- 17. Technische gegevens
- 18. Defectopsporing
- 19. Onderhoudsschema
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Descrizione dell’apparecchio
- 4. Per la vostra sicurezza
- 5. Descrizione dei simboli
- 6. Equipaggiamento fornito
- 7. Preparazione per la messa in servizio dell'apparecchio
- 7.1 Montaggio prolungamento canale di scarico
- 7.2 Montaggio delle ruote e del telaio di trasporto
- 7.3 Montaggio sportello- deflettore
- 7.4 Apertura e chiusura dello sportello-deflettore
- 7.5 Montaggio disco portalame
- 7.6 Smontaggio disco portalame
- 7.7 Montaggio imbuto di caricamento
- 7.8 Smontaggio imbuto di caricamento
- 7.9 Carburante e olio motore
- 8. Istruzioni di lavoro
- 9. Dispositivi per la sicurezza
- 10. Messa in servizio dell'apparecchio
- 11. Manutenzione
- 12. Trasporto
- 13. Minimizzare l’usura ed evitare danni
- 14. Ricambi standard
- 15. Tutela dell’ambiente
- 16. Dichiarazione di conformità EU
- 17. Dati tecnici
- 18. Risoluzione guasti
- 19. Programma Assistenza Tecnica
- 1. Índice
- 2. Acerca de este manual de instrucciones
- 3. Descripción del equipo
- 4. Para su seguridad
- 5. Descripción de los símbolos
- 6. Contenido del suministro
- 7. Preparar el equipo para el servicio
- 8. Indicaciones para el trabajo
- 9. Dispositivos de seguridad
- 10. Poner el equipo en servicio
- 11. Mantenimiento
- 12. Transporte
- 13. Reducir el desgaste y prevenir daños
- 14. Piezas de recambio habituales
- 15. Protección del medio ambiente
- 16. Declaración de conformidad de la UE
- 17. Datos técnicos
- 18. Localización de anomalías
- 19. Plan de mantenimiento
- 1. Índice
- 2. Sobre este manual de utilização
- 3. Descrição do aparelho
- 4. Para sua segurança
- 5. Descrição de símbolos
- 6. Fornecimento
- 7. Preparar o aparelho para o funcionamento
- 7.1 Montar a extensão do canal de expulsão
- 7.2 Montar as rodas e o chassis
- 7.3 Montar a tampa de expulsão
- 7.4 Abrir e fechar a tampa de expulsão
- 7.5 Montar o disco das lâminas
- 7.6 Desmontar o disco das lâminas
- 7.7 Montar o funil de enchimento
- 7.8 Desmontar o funil de enchimento
- 7.9 Combustível e óleo do motor
- 8. Instruções para trabalhar
- 9. Dispositivos de segurança
- 10. Colocar o aparelho em funcionamento
- 11. Manutenção
- 12. Transporte
- 13. Minimização do desgaste e prevenção de danos
- 14. Peças de reposição comuns
- 15. Proteção do meio ambiente
- 16. Declaração de conformidade UE
- 17. Dados técnicos
- 18. Localização de falhas
- 19. Plano de manutenção
- 1. Innholdsfortegnelse
- 2. Om denne bruksanvisningen
- 3. Maskinbeskrivelse
- 4. For din egen sikkerhet
- 5. Symbolforklaring
- 6. Produktkomponenter
- 7. Gjøre maskinen klar for bruk
- 8. Informasjon om arbeid
- 9. Sikkerhetsutstyr
- 10. Ta maskinen i bruk
- 11. Vedlikehold
- 12. Transport
- 13. Minimere slitasjen og unngå skader
- 14. Vanlige reservedeler
- 15. Miljøvern
- 16. EU-samsvarserklæring
- 17. Tekniske data
- 18. Feilsøking
- 19. Serviceplan
- 1. Innehållsförteckning
- 2. Information om denna bruksanvisning
- 3. Maskinbeskrivning
- 4. För din säkerhet
- 5. Symbolbeskrivning
- 6. Leveransens omfattning
- 7. Göra maskinen klar för användning
- 8. Arbetsanvisningar
- 9. Säkerhetsanordningar
- 10. Ta maskinen i bruk
- 11. Underhåll
- 12. Transport
- 13. Minimera slitage och förhindra skador
- 14. Vanliga reservdelar
- 15. Miljöskydd
- 16. EU- konformitetsdeklaration
- 17. Tekniska data
- 18. Felsökning
- 19. Serviceschema
- 1. Sisällysluettelo
- 2. Tätä käyttöopasta koskevia tietoja
- 3. Laitekuvaus
- 4. Turvallisuutesi vuoksi
- 5. Kuvasymbolien selitykset
- 6. Toimitussisältö
- 7. Laitteen valmistelu käyttöä varten
- 8. Työskentelyohjeita
- 9. Turvalaitteet
- 10. Laitteen käyttöönotto
- 11. Huolto
- 12. Kuljetus
- 13. Kulumisen minimointi ja vaurioiden ehkäisy
- 14. Varaosat
- 15. Ympäristönsuojelu
- 16. EU- vaatimustenmukaisuusvaku utus
- 17. Tekniset tiedot
- 18. Vianetsintä
- 19. Huolto-ohjelma
- 1. Indholdsfortegnelse
- 2. Om denne betjeningsvejledning
- 3. Beskrivelse af maskinen
- 4. Sikkerhed
- 5. Symbolforklaring
- 6. Medfølgende dele
- 7. Klargøring af maskinen
- 8. Arbejdsanvisninger
- 9. Sikkerhedsanordninger
- 10. Tag maskinen i brug
- 11. Vedligeholdelse
- 12. Transport
- 13. Sådan minimerer du slid og undgår skader
- 14. Standardreservedele
- 15. Miljøbeskyttelse
- 16. EC- overensstemmelseserklærin g
- 17. Tekniske data
- 18. Fejlsøgning
- 19. Serviceplan
- 1. Spis treści
- 2. Uwagi dotyczące instrukcji obsługi
- 3. Opis urządzenia
- 4. Zasady bezpiecznej pracy
- 5. Objaśnienie symboli
- 6. Wyposażenie standardowe
- 7. Przygotowanie urządzenia do pracy
- 8. Wskazówki dotyczące wykonywania pracy
- 9. Urządzenia zabezpieczające
- 10. Uruchamianie urządzenia
- 11. Konserwacja
- 12. Transport
- 13. Ograniczanie zużycia i zapobieganie uszkodzeniom
- 14. Typowe części zamienne
- 15. Ochrona środowiska
- 16. Deklaracja zgodności UE
- 17. Dane techniczne
- 18. Wykrywanie usterek
- 19. Plan czynności serwisowych
- 1. Kazalo
- 2. O navodilih za uporabo
- 3. Opis naprave
- 4. Za vašo varnost
- 5. Opis simbolov
- 6. Obseg dobave
- 7. Priprava naprave na uporabo
- 7.1 Namestitev podaljška izmeta
- 7.2 Namestitev koles in podvozja
- 7.3 Namestitev izmetalne lopute
- 7.4 Odpiranje in zapiranje izmetalne lopute
- 7.5 Namestitev rezalne plošče
- 7.6 Odstranjevanje rezalne plošče
- 7.7 Namestitev polnilnega lijaka
- 7.8 Odstranjevanje polnilnega lijaka
- 7.9 Pogonsko gorivo in motorno olje
- 8. Napotki za delo
- 9. Varnostna oprema
- 10. Začetek uporabe naprave
- 11. Vzdrževanje
- 12. Transport
- 13. Zmanjšanje obrabe in preprečevanje okvar
- 14. Običajni nadomestni deli
- 15. Varovanje okolja
- 16. EU-izjava o skladnosti
- 17. Tehnični podatki
- 18. Iskanje napak
- 19. Načrt servisiranja
- 1. Obsah
- 2. O tomto návode na obsluhu
- 3. Popis stroja
- 4. Pre vašu bezpečnosť
- 5. Popis symbolov
- 6. Rozsah dodávky
- 7. Príprava stroja na prevádzku
- 8. Pokyny pre prácu
- 9. Bezpečnostné zariadenia
- 10. Uvedenie stroja do prevádzky
- 11. Údržba
- 12. Preprava stroja
- 13. Opatrenia na minimalizovanie opotrebovania a na zabránenie vzniku škôd
- 14. Bežné náhradné diely
- 15. Ochrana životného prostredia
- 16. Prehlásenie o zhode výrobcom - EÚ
- 17. Technické údaje
- 18. Hľadanie porúch
- 19. Servisný plán
- 1. Tartalomjegyzék
- 2. A használati útmutatóhoz
- 3. A gép leírása
- 4. A biztonság érdekében
- 5. A szimbólumok leírása
- 6. Szállítási terjedelem
- 7. A gép összeszerelése
- 7.1 A kidobóhosszabbítás felszerelése
- 7.2 A kerekek és a szállító alváz felszerelése
- 7.3 A kidobónyílás fedelének felszerelése
- 7.4 A kidobónyílás fedelének felnyitása és bezárása
- 7.5 A késtárcsa felszerelése
- 7.6 A késtárcsa leszerelése
- 7.7 A tölcsér felszerelése
- 7.8 A tölcsér leszerelése
- 7.9 Üzemanyag és motorolaj
- 8. Munkavégzési tanácsok
- 9. Biztonsági berendezések
- 10. A gép üzembe helyezése
- 11. Karbantartás
- 12. Szállítás
- 13. A kopás minimalizálása és a meghibásodások elkerülése
- 14. Általános pótalkatrészek
- 15. Környezetvédelem
- 16. A gyártó uniós megfelelőségi nyilatkozata
- 17. Műszaki adatok
- 18. Hibakeresés
- 19. Szervizelési időpontok
- 1. Sadržaj
- 2. O ovim uputama za uporabu
- 3. Opis uređaja
- 4. Za vašu sigurnost
- 5. Opis simbola
- 6. Opseg isporuke
- 7. Priprema uređaja za rad
- 8. Napomene uz rad
- 9. Sigurnosne naprave
- 10. Pokretanje uređaja
- 11. Održavanje
- 12. Transport
- 13. Minimaliziranje trošenja i izbjegavanje šteta
- 14. Uobičajeni rezervni dijelovi
- 15. Zaštita okoliša
- 16. EU izjava o usklađenosti
- 17. Tehnički podaci
- 18. Traženje pogrešaka
- 19. Servisni plan
- 1. Obsah
- 2. O tomto návodu k použití
- 3. Popis stroje
- 4. Pro vaši bezpečnost
- 5. Popis symbolů
- 6. Rozsah dodávky
- 7. Příprava stroje k provozu
- 8. Pokyny pro práci
- 9. Bezpečnostní zařízení
- 10. Uvedení stroje do provozu
- 11. Údržba
- 12. Přeprava stroje
- 13. Opatření pro minimalizování opotřebení a zabránění vzniku škod
- 14. Běžné náhradní díly
- 15. Ochrana životního prostředí
- 16. Prohlášení o shodnosti výroby EU
- 17. Technické údaje
- 18. Hledání závad
- 19. Servisní plán
- 1. Satura rādītājs
- 2. Par šo lietošanas pamācību
- 3. Ierīces apraksts
- 4. Jūsu drošībai
- 5. Simbolu apraksts
- 6. Piegādes komplekts
- 7. Ierīces sagatavošana darbam
- 8. Norādījumi par darbu
- 9. Drošības ierīces
- 10. Ierīces sagatavošana darbam
- 11. Apkope
- 12. Transportēšana
- 13. Nodiluma samazināšana un bojājumu novēršana
- 14. Parastās rezerves daļas
- 15. Vides aizsardzība
- 16. ES atbilstības deklarācija
- 17. Tehniskie parametri
- 18. Darbības traucējummeklēšana
- 19. Apkopes grafiks
- 1. Turinys
- 2. Apie šią naudojimo instrukciją
- 3. Įrenginio aprašymas
- 4. Jūsų saugumui
- 5. Simbolių aprašymas
- 6. Komplektas
- 7. Įrenginio paruošimas eksploatacijai
- 7.1 Žolės išmetimo įrenginio ilgintuvo montavimas
- 7.2 Ratų ir važiuoklės montavimas
- 7.3 Žolės išmetimo įrenginio dangčio montavimas
- 7.4 Žolės išmetimo įrenginio dangčio atidarymas ir uždarymas
- 7.5 Peilių disko montavimas
- 7.6 Peilių disko išmontavimas
- 7.7 Pripildymo piltuvo montavimas
- 7.8 Pripildymo piltuvo išmontavimas
- 7.9 Degalai ir variklio alyva
- 8. Darbo nuorodos
- 9. Saugos įtaisai
- 10. Įrenginio naudojimo pradžia
- 11. Techninė priežiūra
- 12. Gabenimas
- 13. Dėvėjimosi mažinimas ir priemonės, padedančios išvengti gedimų
- 14. Įprastos atsarginės dalys
- 15. Aplinkos apsauga
- 16. ES gamintojo atitikties deklaracija
- 17. Techniniai duomenys
- 18. Gedimų paieška
- 19. Techninės priežiūros planas
- 1. Cuprins
- 2. Despre aceste instrucţiuni de utilizare
- 3. Descrierea aparatului
- 4. Pentru siguranţa dvs.
- 5. Descrierea simbolurilor
- 6. Conţinutul pachetului
- 7. Pregătirea aparatului pentru lucru
- 7.1 Montarea prelungitorului de evacuare
- 7.2 Montarea roţilor şi a cadrului
- 7.3 Montarea clapetei de evacuare
- 7.4 Deschiderea şi închiderea clapetei de evacuare
- 7.5 Montarea discului de tăiere
- 7.6 Demontarea discului de tăiere
- 7.7 Montarea pâlniei de umplere
- 7.8 Demontarea pâlniei de umplere
- 7.9 Carburant şi ulei de motor
- 8. Indicaţii pentru lucru
- 9. Dispozitive de siguranţă
- 10. Punerea în funcţiune a aparatului
- 11. Întreţinerea
- 12. Transportul
- 13. Reducerea uzurii şi evitarea deteriorărilor
- 14. Piese de schimb cerute mai frecvent
- 15. Protecţia mediului
- 16. Declaraţia de conformitate UE
- 17. Specificaţii tehnice
- 18. Identificarea cauzelor defecţiunilor
- 19. Planul de întreţinere
- 1. Περιεχόμενα
- 2. Σχετικά με αυτές τις οδηγίες χρήσης
- 3. Περιγραφή εργαλείου
- 4. Για τη δική σας ασφάλεια
- 5. Περιγραφή συμβόλων
- 6. Περιεχόμενα συσκευασίας
- 7. Προετοιμασία του εργαλείου για χρήση
- 8. Υποδείξεις για την εργασία
- 9. Συστήματα ασφαλείας
- 10. Θέση του εργαλείου σε λειτουργία
- 11. Συντήρηση
- 12. Μεταφορά
- 13. Ελαχιστοποίηση φθορών και αποφυγή βλαβών
- 14. Συνηθισμένα ανταλλακτικά
- 15. Προστασία περιβάλλοντος
- 16. Πιστοποιητικό συμβατότητας ΕΕ
- 17. Τεχνικά στοιχεία
- 18. Εντοπισμός βλαβών
- 19. Πρόγραμμα συντήρησης
- 1. Содержание
- 2. О пользовании данной инструкцией по эксплуатации
- 3. Описание устройства
- 4. Техника безопасности
- 5. Описание символов
- 6. Комплект поставки
- 7. Подготовка устройства к работе
- 8. Рекомендации по работе
- 9. Защитные устройства
- 10. Введение устройства в работу
- 11. Техническое обслуживание
- 12. Транспортировка
- 13. Сведение к минимуму износа и предотвращение повреждений
- 14. Стандартные запчасти
- 15. Охрана окружающей среды
- 16. Декларация изготовителя о соответствии директивам EU
- 17. Технические данные
- 18. Поиск неисправностей
- 19. График сервисного обслуживания
- 1. Съдържание
- 2. За тази инструкция за експлоатация
- 3. Описание на уреда
- 4. За Вашата безопасност
- 5. Описание на символите
- 6. Окомплектовка
- 7. Подготовка на уреда за пускане в експлоатация
- 8. Указания за работа
- 9. Защитни приспособления
- 10. Пускане на уреда в експлоатация
- 11. Поддръжка
- 12. Транспортиране
- 13. Минимизиране на износването и предотвратяване на повреди
- 14. Обичайни резервни части
- 15. Опазване на околната среда
- 16. ЕС Декларация за съответствие
- 17. Технически данни
- 18. Откриване на повреди
- 19. Сервизен план
- 1. Зміст
- 2. Пояснення до цього посібника
- 3. Опис приладу
- 4. Техніка безпеки
- 5. Опис позначень
- 6. Комплект постачання
- 7. Підготовка приладу до експлуатації
- 8. Вказівки щодо роботи
- 9. Захисні механізми
- 10. Введення приладу в експлуатацію
- 11. Обслуговування
- 12. Транспортування
- 13. Зведення зносу до мінімуму та запобігання пошкодженням
- 14. Замінювані запчастини
- 15. Захист довкілля
- 16. Декларація виробника про відповідність стандартам ЄС
- 17. Технічні характеристики
- 18. Усунення несправностей
- 19. План технічного обслуговування
- 1. Sisukord
- 2. Selles kasutusjuhendis
- 3. Seadme kirjeldus
- 4. Ohutusnõuded
- 5. Sümbolite kirjeldus
- 6. Tarnekomplekt
- 7. Seadme töökorda seadmine
- 8. Juhised töötamiseks
- 9. Turvaseadised
- 10. Seadme käivitamine
- 11. Hooldus
- 12. Transport
- 13. Kulumise minimeerimine ja kahjude vältimine
- 14. Tavalised varuosad
- 15. Keskkonnakaitse
- 16. EL-i vastavusdeklaratsioon
- 17. Tehnilised andmed
- 18. Tõrkeotsing
- 19. Teenindusplaan
- 1. Мазмұны
- 2. Аталмыш пайдалану жөніндегі нұсқаулық жайында
- 3. Құрылғылардың сипаты
- 4. Қауіпсіздік шаралары
- 5. Таңбалардың сипаттамасы
- 6. Жеткізілім жиынтығы
- 7. Қолданысқа дайындау
- 7.1 Лақтырманы ұзарту құралын орнату
- 7.2 Дөңгелекті және жүру бөлігін орнату
- 7.3 Лақтырманың қақпағын орнату
- 7.4 Қалдықтарды түсіріп тастауға арналған жапқышты ашу және жабу
- 7.5 Дискілі пышақты орнату
- 7.6 Дискілі пышақты бөлшектеу
- 7.7 Тиеу шұңғымасын орнату
- 7.8 Тиеу шұңғымасын бөлшектеу
- 7.9 Жанармай және мотор майы
- 8. Жұмыс нұсқаулары
- 9. Сақтандырғыш құрылғылар
- 10. Қолданысқа енгізу
- 11. Техникалық қызмет көрсету
- 12. Тасымалдау
- 13. Тозу дәрежесін барынша азайту және зақымдардан қорғау
- 14. Басқа да қосалқы бөлшектер
- 15. Қоршаған ортаны қорғау
- 16. ЕО талаптарына сәйкестік туралы декларация
- 17. Техникалық деректер
- 18. Ақаулықтарды іздеу
- 19. Техникалық қызмет көрсету жоспары
35
DEFRNLITESPTNOSVFIDAPLSLSKHU EN
0478 216 9907 C - EN
In order to prevent fire hazards, keep the
area around the air vents, cooling ribs and
the area of the exhaust free from
e.g. grass, straw, moss, leaves or
escaping grease.
Maintenance operations:
Only maintenance operations described in
this instruction manual may be carried out.
Have all other work performed by a
specialist dealer.
If you do not have the necessary expertise
or auxiliary equipment, please always
contact a specialist dealer.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
Only use tools, accessories or
attachments approved for this machine by
STIHL or technically identical parts.
Otherwise, there may be a risk of
accidents resulting in personal injury or
damage to the machine. If you have any
questions, please consult a specialist
dealer.
The characteristics of original STIHL tools,
accessories and spare parts are optimally
adapted to the machine and the user's
requirements. Genuine STIHL spare parts
can be recognised by the STIHL spare
parts number, by the STIHL lettering and,
if present, by the STIHL spare parts
symbol. On smaller parts, only the symbol
may be present.
For safety reasons, fuel-carrying
components (fuel line, fuel cock, fuel tank,
tank cap, connections, etc.) must be
checked regularly for damage and leaks
and replaced by a technician if necessary
(STIHL recommends STIHL specialist
dealers).
Always keep warning and information
stickers clean and readable. Damaged or
missing stickers must be replaced by new,
original plates from your STIHL specialist
dealer. If a component is replaced with a
new component, ensure that the new
component is provided with the same
stickers.
Only perform work on the cutting unit when
wearing thick work gloves and exercising
extreme care.
Ensure that all nuts, pins and screws,
especially all the cutting unit screws, are
securely tightened, so that the machine is
in a safe operating condition.
Check the entire machine for wear or
damage on a regular basis, particularly
before extended periods when the
machine is not in use (e.g. over winter).
For safety reasons, worn or damaged
parts must be replaced immediately to
ensure that the machine is always in a safe
operating condition.
Never alter the basic setting of the engine
or run at excessive engine speeds.
Components or guards that are removed
for maintenance operations must be
properly reinstalled immediately.
4.8 Storage for prolonged periods
without operation
Allow the engine to cool before storing the
machine in an enclosed space.
Store the machine with empty fuel tank
and the fuel reserve in a lockable and well-
ventilated room.
Ensure that the machine is protected from
unauthorised use (e.g. by children).
Never store the machine with petrol in the
tank inside a building. The resulting petrol
fumes could come into contact with naked
flames or sparks and could be ignited.
If the tank has to be emptied
(e.g. immobilisation before the winter
break), the fuel tank must be emptied out
of doors only (empty the tank by running
the engine out of doors, for example).
Thoroughly clean the machine before
storage (e.g. winter break).
Only store the machine with the spark plug
socket disconnected.
Store the machine in good operational
condition.
Only transport the garden shredder with
the feed chute fitted.
Risk of injury due to exposed blades.
4.9 Disposal
Waste products such as used engine oil or
fuel, used lubricants, filters, batteries and
similar wearing parts can be harmful to
people, animals and the environment, and
must consequently be disposed of
properly.
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products. STIHL
recommends STIHL specialist dealers.
Ensure that old machines are properly
disposed of. Render the machine
unusable prior to disposal. In order to
prevent accidents, remove the ignition
lead, empty the fuel tank and drain the
engine oil in particular.