User Manual

61
DEFRNLITESPTNOSVFIDAPLSL EN
0478 201 9916 A - EN
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Damage to the motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots, cooling ribs, fan
wheel).
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage to the machine through the
use of inferior-quality spare parts.
– Damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
Soft material blade disc assembly:
6012 700 5110
Hard material blade disc assembly:
6012 700 5100
Long wing blade:
6012 702 0310
Short wing blade:
6012 702 0300
Blade (x6):
6008 702 0121
Blade (x1):
6012 702 0100
Counter-blade:
6012 702 0500
Shredding material should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life.
15.1 Disposal
Render the machine unusable prior to
disposal.
In particular, remove the power cable and
electric cable to the motor for this purpose.
Risk of injury from the blades.
Always store an old garden shredder in a
safe place prior to scrapping. Make sure
that the machine and the blades are kept
out of the reach of children.
16.1 STIHL GHE 420.0, GHE 450.0
Garden Shredder
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
– design: electric garden shredder
– manufacturer's brand: STIHL
– type: GHE 420.0, GHE 450.0
– serial number: 6012
complies with the relevant provisions of
Directives 2000/14/EC, 2006/42/EC,
2014/30/EU and 2011/65/EU and has
been developed and manufactured in
accordance with the versions of the
following standards valid on the date of
manufacture: EN 50434, EN 60335-1,
EN 55014-1, EN 55014-2, EN 61000-3-2
and EN 61000-3-3 (where applicable).
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystrasse 2
D-90431 Nuremberg
The measured and guaranteed sound
power levels were determined in
accordance with Directive 2000/14/EC,
Appendix V.
GHE 420.0
– Measured sound power level:
102.1 dB(A)
– Guaranteed sound power level:
106 dB(A)
14. Standard spare parts
15. Environmental protection
16. EU - Declaration of
conformity