Instruction Manual

HL
English
9
Models with loop handle
HL-0° 500 mm
– STIHL KA 85 R
– STIHL FS 91 R, FS 111 R,
FS 131 R
– STIHL HL 92, HL 94
HL-145° 500 mm, 600 mm
– STIHL KA 85 R
– STIHL FS 91 R, FS 111 R,
FS 131 R
– STIHL HL 92, HL 94
Machines with handle hose, without bike
handle or loop handle
HL-0° 500 mm
– STIHLHL92K
– STIHL HT 102, HT 132
HL-145° 500 mm, 600 mm
– STIHL HT 102, HT 132
– STIHL HL 92 K. The HL-145°
version in combination with basic
power tools with a handle hose is
not approved for ground-level
cutting.
Preparations for Mounting the
Attachment
WARNING
To reduce the risk of injury, always shut
off the engine before converting the
basic power tool.
NOTICE
Make sure the work area is clean before
mounting or removing the attachment.
N Rest the power tool on the machine
support.
Removing the Protective Cap
If a cap is fitted on the end of the power
tool's drive tube:
N Pull the protective cap off the end of
the drive tube and keep it in a safe
place.
002BA656 KN
002BA370 KN
Mounting the Attachment
413BA014 KN