Instruction Manual

HS 82 R, HS 82 T
English
19
N Observe safety precautions – see
chapter on "Safety Precautions and
Working Techniques".
The stop switch (1) is in the normal run
position I.
N Press the manual fuel pump bulb at
least five times – even if the bulb is
filled with fuel.
Cold engine (cold start)
N Depress the outer ring (arrows) of
the choke knob (2) and then turn it
to g .
Warm engine (warm start)
N Depress the outer ring (arrows) of
the choke knob (2) and then turn it
to f.
Also use this setting if the engine has
been running but is still cold.
Cranking
N Place the machine on the ground.
N Remove the blade scabbard. Check
that the cutting blades are not
touching the ground or any other
obstacles.
N Make sure you have a safe and
secure footing.
N Hold the machine firmly with your
left hand on the fan housing and
press down.
N Hold the starter grip with your right
hand.
Version without Easy2Start
N Pull the starter grip slowly until you
feel it engage and then give it a brisk
strong pull.
NOTICE
Do not pull out the starter rope all the
way – it might otherwise break.
N Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
Version with Easy2Start
N Pull the starter grip steadily.
Starting / Stopping the
Engine
1
0000-GXX-1796-A0
0000-GXX-1806-A0
2
0000-GXX-1803-A0
2
0000-GXX-1804-A0