Instruction Manual
Table Of Contents
- 1 Vorwort
- 2 Informationen zu dieser Gebrauchsanleitung
- 3 Übersicht
- 4 Sicherheitshinweise
- 5 Strauchschere einsatzbereit machen
- 6 Akku laden und LEDs
- 7 Strauchschere zusammenbauen
- 8 Akku einsetzen und herausnehmen
- 9 Strauchschere einschalten und ausschalten
- 10 Strauchschere und Akku prüfen
- 11 Mit der Strauchschere arbeiten
- 12 Nach dem Arbeiten
- 13 Transportieren
- 14 Aufbewahren
- 15 Reinigen
- 16 Warten
- 17 Reparieren
- 18 Störungen beheben
- 19 Technische Daten
- 20 Ersatzteile und Zubehör
- 21 Entsorgen
- 22 EU-Konformitätserklärung
- 23 Anschriften
- 24 Allgemeine Sicherheitshinweise für Elektrowerkzeuge
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing Shrub Shears for Operation
- 6 Charging the Battery, LEDs
- 7 Assembling the Shrub Shears
- 8 Removing and Fitting the Battery
- 9 Switching the Shrub Shears On/Off
- 10 Checking the Shrub Shears and Battery
- 11 Operating the Shrub Shears
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Spare Parts and Accessories
- 21 Disposal
- 22 EC Declaration of Conformity
- 23 General Power Tool Safety Warnings
- 1 Préface
- 2 Informations concernant la présente Notice d'emploi
- 3 Vue d'ensemble
- 4 Prescriptions de sécurité
- 4.1 Symboles d'avertissement
- 4.2 Utilisation conforme à la destination prévue
- 4.3 Exigences posées à l'utilisateur
- 4.4 Vêtements et équipement
- 4.5 Aire de travail et voisinage
- 4.6 Bon état pour une utilisation en toute sécurité
- 4.7 Utilisation
- 4.8 Recharge
- 4.9 Branchement électrique
- 4.10 Transport
- 4.11 Rangement
- 4.12 Nettoyage, maintenance et réparation
- 5 Préparatifs avant l'utilisation du sculpte-haies
- 6 Recharge de la batterie et DEL
- 7 Assemblage du sculpte-haies
- 8 Introduction et extraction de la batterie
- 9 Mise en marche et arrêt du sculpte- haies
- 10 Contrôle du sculpte-haies et de la batterie
- 11 Travail avec le sculpte-haies
- 12 Après le travail
- 13 Transport
- 14 Rangement
- 15 Nettoyage
- 16 Maintenance
- 17 Réparation
- 18 Dépannage
- 19 Caractéristiques techniques
- 20 Pièces de rechange et accessoires
- 21 Mise au rebut
- 22 Déclaration de conformité UE
- 23 Indications générales de sécurité pour outils électroportatifs
- 23.1 Introduction
- 23.2 Sécurité à l'endroit de travail
- 23.3 Sécurité relative au système électrique
- 23.4 Sécurité des personnes
- 23.5 Utilisation et emploi soigneux d'outils électroportatifs
- 23.6 Utilisation et emploi soigneux d'outils électroportatifs sans fil
- 23.7 Service après-vente
- 23.8 Consignes de sécurité applicables aux taille- haies
- 1 Premessa
- 2 Informazioni sulle presenti Istruzioni d’uso
- 3 Sommario
- 4 Avvertenze di sicurezza
- 4.1 Simboli di avvertimento
- 4.2 Impiego secondo la destinazione
- 4.3 Requisiti dell'utente
- 4.4 Abbigliamento ed equipaggiamento
- 4.5 Zona di lavoro e area circostante
- 4.6 Condizioni di sicurezza
- 4.7 Impiego
- 4.8 Carica
- 4.9 Collegamento elettrico
- 4.10 Trasporto
- 4.11 Conservazione
- 4.12 Pulizia, manutenzione e riparazione
- 5 Preparare il tagliacespugli
- 6 Carica della batteria e LED
- 7 Assemblare il tagliacespugli
- 8 Inserire e togliere la batteria
- 9 Accendere e spegnere il tagliacespugli
- 10 Controllare tagliacespugli e batteria
- 11 Lavorare con il tagliacespugli
- 12 Dopo il lavoro
- 13 Trasporto
- 14 Conservazione
- 15 Pulizia
- 16 Manutenzione
- 17 Riparazione
- 18 Eliminazione dei guasti
- 19 Dati tecnici
- 20 Ricambi e accessori
- 21 Smaltimento
- 22 Dichiarazione di conformità UE
- 23 Avvertenze di sicurezza generali per attrezzi elettrici
- 1 Voorwoord
- 2 Informatie met betrekking tot deze handleiding
- 3 Overzicht
- 4 Veiligheidsinstructies
- 5 Struikschaar klaar maken voor gebruik
- 6 Accu laden en leds
- 7 Struikschaar monteren
- 8 Accu aanbrengen en wegnemen
- 9 Struikschaar inschakelen en uitschakelen
- 10 Struikschaar en accu controleren
- 11 Met de struikschaar werken
- 12 Na de werkzaamheden
- 13 Vervoeren
- 14 Opslaan
- 15 Reinigen
- 16 Onderhoud
- 17 Repareren
- 18 Storingen opheffen
- 19 Technische gegevens
- 20 Onderdelen en toebehoren
- 21 Milieuverantwoord afvoeren
- 22 EU-conformiteitsverklaring
- 23 Algemene veiligheidswaarschuwingen voor elektrische gereedschappen
0458-601-9621-A
48
English
6 Charging the Battery, LEDs
6.2 Charging the Battery
The charging time depends on several factors, e.g.
temperature of the battery or the ambient temperature. The
actual charging time may differ from the specified charging
time. For specified charging times see
www.stihl.com/charging-times.
The charging process starts automatically
when the plug is inserted in a wall outlet and
the battery is fitted in the charger. The
charger switches itself off automatically when
the battery is fully charged.
The battery and charger become hot during the charging
process.
► Insert the plug (5) in a convenient wall outlet (6).
The charger (2) runs a self test. The LED (3) glows green
for about 1 second and then red for about 1 second.
► Fit the connecting cable (4).
► Insert the battery (1) in the guides in the charger (2) and
press it home as far as stop.
The LED (3) glows or flashes green. The battery (2) is
being charged.
► If the LEDs (3) stop glowing: The battery is fully charged
and can be taken out of the charger (2).
► If the charger (2) is no longer required. Disconnect the
plug (5) from the wall outlet (6).
6.3 Displaying State of Charge
► Insert battery.
► Press the button (1).
The LEDs emit green light for about 5 seconds and
indicate the state of charge.
► If the LED on the right flashes green: Charge the battery.
6.4 LEDs on Shrub Shears
The LEDs can show the state of charge or malfunctions. The
LEDs can glow or flash green or red.
The state of charge is indicated when the LEDs glow or flash
green.
► If the LEDs glow or flash red: Troubleshooting, @ 18.1.
There is a malfunction in the shrub shears or battery.
6.5 LED on Charger
The LED indicates the operating status of the charger or
faults. The LED can glow or flash green or red.
If the LED glows or flashes green, the battery is being
charged.
► If the LED glows or flashes red: Troubleshooting, @ 18.2.
There is a malfunction in charger or battery.
2
0000-GXX-8803-A0
3
4
5
6
1
0-20%
20-40%
40-60%
60-80%
80-100%
1
0000-GXX-A625-A1