Instruction Manual
Table Of Contents
- 1 Vorwort
- 2 Informationen zu dieser Gebrauchsanleitung
- 3 Übersicht
- 4 Sicherheitshinweise
- 5 Strauchschere einsatzbereit machen
- 6 Akku laden und LEDs
- 7 Strauchschere zusammenbauen
- 8 Akku einsetzen und herausnehmen
- 9 Strauchschere einschalten und ausschalten
- 10 Strauchschere und Akku prüfen
- 11 Mit der Strauchschere arbeiten
- 12 Nach dem Arbeiten
- 13 Transportieren
- 14 Aufbewahren
- 15 Reinigen
- 16 Warten
- 17 Reparieren
- 18 Störungen beheben
- 19 Technische Daten
- 20 Ersatzteile und Zubehör
- 21 Entsorgen
- 22 EU-Konformitätserklärung
- 23 Anschriften
- 24 Allgemeine Sicherheitshinweise für Elektrowerkzeuge
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing Shrub Shears for Operation
- 6 Charging the Battery, LEDs
- 7 Assembling the Shrub Shears
- 8 Removing and Fitting the Battery
- 9 Switching the Shrub Shears On/Off
- 10 Checking the Shrub Shears and Battery
- 11 Operating the Shrub Shears
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Spare Parts and Accessories
- 21 Disposal
- 22 EC Declaration of Conformity
- 23 General Power Tool Safety Warnings
- 1 Préface
- 2 Informations concernant la présente Notice d'emploi
- 3 Vue d'ensemble
- 4 Prescriptions de sécurité
- 4.1 Symboles d'avertissement
- 4.2 Utilisation conforme à la destination prévue
- 4.3 Exigences posées à l'utilisateur
- 4.4 Vêtements et équipement
- 4.5 Aire de travail et voisinage
- 4.6 Bon état pour une utilisation en toute sécurité
- 4.7 Utilisation
- 4.8 Recharge
- 4.9 Branchement électrique
- 4.10 Transport
- 4.11 Rangement
- 4.12 Nettoyage, maintenance et réparation
- 5 Préparatifs avant l'utilisation du sculpte-haies
- 6 Recharge de la batterie et DEL
- 7 Assemblage du sculpte-haies
- 8 Introduction et extraction de la batterie
- 9 Mise en marche et arrêt du sculpte- haies
- 10 Contrôle du sculpte-haies et de la batterie
- 11 Travail avec le sculpte-haies
- 12 Après le travail
- 13 Transport
- 14 Rangement
- 15 Nettoyage
- 16 Maintenance
- 17 Réparation
- 18 Dépannage
- 19 Caractéristiques techniques
- 20 Pièces de rechange et accessoires
- 21 Mise au rebut
- 22 Déclaration de conformité UE
- 23 Indications générales de sécurité pour outils électroportatifs
- 23.1 Introduction
- 23.2 Sécurité à l'endroit de travail
- 23.3 Sécurité relative au système électrique
- 23.4 Sécurité des personnes
- 23.5 Utilisation et emploi soigneux d'outils électroportatifs
- 23.6 Utilisation et emploi soigneux d'outils électroportatifs sans fil
- 23.7 Service après-vente
- 23.8 Consignes de sécurité applicables aux taille- haies
- 1 Premessa
- 2 Informazioni sulle presenti Istruzioni d’uso
- 3 Sommario
- 4 Avvertenze di sicurezza
- 4.1 Simboli di avvertimento
- 4.2 Impiego secondo la destinazione
- 4.3 Requisiti dell'utente
- 4.4 Abbigliamento ed equipaggiamento
- 4.5 Zona di lavoro e area circostante
- 4.6 Condizioni di sicurezza
- 4.7 Impiego
- 4.8 Carica
- 4.9 Collegamento elettrico
- 4.10 Trasporto
- 4.11 Conservazione
- 4.12 Pulizia, manutenzione e riparazione
- 5 Preparare il tagliacespugli
- 6 Carica della batteria e LED
- 7 Assemblare il tagliacespugli
- 8 Inserire e togliere la batteria
- 9 Accendere e spegnere il tagliacespugli
- 10 Controllare tagliacespugli e batteria
- 11 Lavorare con il tagliacespugli
- 12 Dopo il lavoro
- 13 Trasporto
- 14 Conservazione
- 15 Pulizia
- 16 Manutenzione
- 17 Riparazione
- 18 Eliminazione dei guasti
- 19 Dati tecnici
- 20 Ricambi e accessori
- 21 Smaltimento
- 22 Dichiarazione di conformità UE
- 23 Avvertenze di sicurezza generali per attrezzi elettrici
- 1 Voorwoord
- 2 Informatie met betrekking tot deze handleiding
- 3 Overzicht
- 4 Veiligheidsinstructies
- 5 Struikschaar klaar maken voor gebruik
- 6 Accu laden en leds
- 7 Struikschaar monteren
- 8 Accu aanbrengen en wegnemen
- 9 Struikschaar inschakelen en uitschakelen
- 10 Struikschaar en accu controleren
- 11 Met de struikschaar werken
- 12 Na de werkzaamheden
- 13 Vervoeren
- 14 Opslaan
- 15 Reinigen
- 16 Onderhoud
- 17 Repareren
- 18 Storingen opheffen
- 19 Technische gegevens
- 20 Onderdelen en toebehoren
- 21 Milieuverantwoord afvoeren
- 22 EU-conformiteitsverklaring
- 23 Algemene veiligheidswaarschuwingen voor elektrische gereedschappen
0458-601-9621-A
49
English
7 Assembling the Shrub Shears
7.1 Fitting and Removing the Cutting Blades
7.1.1 Fitting the Shrub Shear Blade or Grass Shear Blade
The shrub shear blade and grass shear blade are fitted on
the shrub shears in the same way.
► Switch off the shrub shears and remove the battery.
► Fit the blade scabbard so that it completely covers the
cutting blades.
► Engage the lugs (1) of the shrub shear blade (3) or grass
shear blade (3) on the guides (2).
► Swing the shrub shear blade (3) or grass shear blade (3)
down and press it firmly into place.
The shrub shear blade (3) or grass shear blade (3)
engages with an audible click.
► Remove the blade scabbard (4).
7.1.2 Removing the Shrub Shear Blade or Grass Shear
Blade
The shrub shear blade and grass shear blade are removed
in the same way.
► Switch off the shrub shears and remove the battery.
► Fit the blade scabbard so that it completely covers the
cutting blades.
► Press in both locking levers (1).
The shrub shear blade (2) or grass shear blade (2) is
unlocked.
► Remove the shrub shear blade (2) or grass shear blade
(2).
A foam seal (3) protects the gearbox from contamination
during operation. The seal (3) is permanently connected to
the shrub shears and cannot be removed.
8.1 Fitting the Battery
► Push the battery (1) into the battery compartment (2) as
far as stop.
The battery (1) engages in position with a click.
7 Assembling the Shrub Shears
3
1
1
2
2
4
0000-GXX-A615-A0
8 Removing and Fitting the Battery
2
1
3
1
0000-GXX-A616-A0
1
2
0000-GXX-9347-A0