Owner's Manual

HSA 65
English
19
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
Move the retaining latch to
ƒ before performing any work on the power tool.
before starting work after finishing work or daily weekly monthly every 12 months if problem if damaged if required
Complete machine
Visual inspection (condition) X
Clean X
Controls (retaining latch, trigger switch
lockout, trigger switch and switch lever)
Check operation X
Clean XX
Two-hand control
Check function – blades must quickly
come to a standstill when the trigger
switch and/or switch lever is released
X
Cooling inlets
Visual Inspection X
Clean X
All accessible screws and nuts Retighten X
Battery Visual Inspection XXX
Cutting blades
Visual Inspection XXX
Clean
1)
X
Sharpen XX
Gearbox and connecting rod
Have checked by servicing dealer
2)
after
every 50 hours of operation
Have gearbox topped up with STIHL
gear lubricant by servicing dealer
2)
X
Safety labels Replace X
1)
Spray with STIHL resin solvent after cleaning
2)
STIHL recommends a STIHL servicing dealer.