Owner's Manual

HSA 66
English
16
N Release the switch lever (1) and the
trigger switch (2).
N Move the retaining latch (3) to ƒ –
the trigger switch (4) cannot be
operated – the power tool is locked
to prevent start-up.
Always remove the battery from the
power tool during work breaks and after
finishing work.
Remove the battery.
N Press in both locking tabs (1) at the
same time to unlock the battery.
N Take the battery (2) out of the
housing.
When the machine is not in use, store it
in such a way that it does not endanger
others.
Secure it against unauthorized use.
N Move the retaining latch to ƒ.
N Remove the battery.
N Clean the cutting blades, check
condition and spray them with
STIHL resin solvent.
N Fit the blade scabbard.
N Thoroughly clean the machine,
especially the cooling air inlets.
N Store the machine in a dry, locked
location – the blade scabbard can
be mounted to the wall for this
purpose. Keep out of the reach of
children and other unauthorized
persons.
Cover for Battery Compartment
In some markets the machine comes
with a cover for the battery
compartment. It protects the battery
compartment from contamination.
N After finishing work, slide the
cover (1) home until it engages
audibly in position.
Switching Off
9938BA004 KN
1
4
3
3901BA034 KN
3901BA035 KN
1
2
1
Storing the Machine
1
3901BA039 KN