Instruction Manual

HSE 42, HSE 52
English
10
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily working
time is longer or operating conditions are difficult (very dusty work area, etc.), shorten the
specified intervals accordingly.
before starting work after finishing work or daily weekly monthly every 12 months if problem if damaged if required
Complete machine
Visual inspection X
Clean X
Two-hand control
Check function – blades must quickly come
to a standstill when the trigger switch or
switch lever is released
X
Cooling inlets
Visual inspection X
Clean X
Cutting blades
Visual inspection X
Clean
2)
X
Sharpen
1)2)
X
Have replaced by dealer
1)
X
Gearbox and connecting rod
Have checked by servicing dealer
1)
after
every 50 hours of operation
Have gearbox topped up with STIHL gear
lubricant by servicing dealer
1)
X
Carbon brushes.
Have checked by servicing dealer
1)
after
every 100 hours of operation
Have replaced by dealer
1)
X
All accessible screws and nuts Retighten X
Safety labels Replace X
1)
STIHL recommends a STIHL servicing dealer.
2)
Spray with STIHL resin solvent after cleaning