Instruction Manual

HT 100, HT 101, HT 130, HT 131
English
23
HT 101, HT 131 only
N Loosen the screw.
N Adjust shaft to the required length.
N Tighten down the screw firmly.
The type and style of the harness
depend on the market.
Shoulder strap
N Put on the shoulder strap (1).
N Adjust the length of the strap.
N With the power tool attached, the
carabiner (2) must be at about the
same height as your right hip.
Full harness (HT 100, HT 101 only)
N Put on the full harness (1) and
sling (2) as described in the
instruction sheet provided.
N Adjust the harness and thigh
strap (3) as required.
N Rest the powerhead in the sling
during cutting work.
Adjusting the Telescoping
Shaft
Always shut off the engine and fit
the chain guard
390BA049 KN
Fitting the Harness
2
1
390BA040 KN
386BA012 KN
2
1
3