Instruction Manual

HT 100, HT 101, HT 130, HT 131
English
46
Cutting Attachment
Rollomatic guide bars
3/8" Picco chain
Chain sprocket
Please ask your STIHL dealer for the
latest recommendations on new
bar/chain combinations developed after
publication of this instruction manual.
Contact your STIHL dealer for
information regarding special
accessories that may be available for
your product.
Users of this unit should carry out only
the maintenance operations described
in this manual. Other repair work may be
performed only by authorized STIHL
service shops.
Warranty claims following repairs can be
accepted only if the repair has been
performed by an authorized STIHL
servicing dealer using original STIHL
replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and, in some cases, by the STIHL
parts symbol K. The symbol may
appear alone on small parts.
Reduced kickback STIHL guide bar
(with green label)
Cutting length: 12 in. (30 cm)
Pitch: 3/8" P (9.32 mm)
Groove width: 0.043" (1.1 mm)
Nose sprocket: 7-teeth
Reduced kickback STIHL saw chain
(with green label)
Picco Micro Mini Comfort 3
(61 PMMC3)
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 0.043" (1.1 mm)
6-tooth for 3/8" P (spur sprocket)
Special Accessories Maintenance and Repairs