Instruction Manual

HT 56 C
English
27
Fuel tank run until completely dry
N After refueling, press the manual
fuel pump bulb at least five times –
even if the bulb is filled with fuel.
N Set the choke knob to suit the
engine temperature.
N Start the engine.
The unit features a split drive tube that
helps save space during transportation.
Disconnecting the Drive Tube
N Disconnect the shoulder strap from
the carrying ring.
N Place the unit on the ground:
N Loosen the star knob (1) – do not
remove it.
N Pull the front drive tube (2) out of the
coupling sleeve (3).
N Push the cap (4) onto the end of the
front drive tube.
NOTICE
Make sure the ends of the drive tube are
clean.
Connecting the Drive Tube
N Pull the cap off the front drive tube
and keep it in a safe place.
N Put the powerhead on the ground so
that it rests on the machine support.
N Examine ends of drive tube for dirt
and clean if necessary.
N Slide the lug (5) on the front drive
tube (2) into the slot (6) in the
coupling sleeve as far as stop – if
necessary, turn the front drive
tube (2) back and forth while
pushing it home.
Transporting the Unit
4907BA004 KN
1
4907BA005 KN
3
2
4
4907BA011 KN
5
4907BA006 KN
6
2