Instruction Manual

HTA 65, HTA 85
English
28
Trigger
Motor speed can be controlled with the
trigger switch. Depress the trigger switch
to accelerate the motor.
N Release the trigger switch
lockout (1) and the trigger
switch (2).
N Move the retaining latch (3) to ƒ –
the trigger switch (2) cannot be
operated – the power tool is locked
to prevent start-up.
Remove the battery from the power tool
during breaks and after finishing work.
Removing the battery
N Press in both locking tabs (4) at the
same time to unlock the battery (5).
N Take the battery (5) out of the
housing.
When the power tool is not in use, store
it so that it does not endanger others.
Secure it against unauthorized use.
Switching Off
2
1
246BA010 AS
3
2
0022BA026 AS
4
4
9936BA009 KN