Instruction Manual

HTA 65, HTA 85
English
35
Maintenance and Care
The following maintenance intervals apply to normal usage and operating conditions. If your daily
working time is longer or operating conditions are difficult (very dusty work area, resin-rich wood, trop-
ical wood, etc.), shorten the specified intervals accordingly.
Move the retaining latch to
ƒ and remove the battery before performing any work on the power tool.
before starting work after finishing work or daily after changing battery weekly monthly every 12 months if problem if damaged as required
Complete machine
Visual inspection (condition, leaks) X
Clean X
Controls (retaining latch, trigger switch lockout,
trigger switch)
Check operation XX
Clean X X
Chain oil tank Clean X
Chain lubrication Check XX X
Chain
Inspect, also check sharpness XX X
Check chain tension XX X
Sharpen X
Guide bar
Check (wear, damage) X
Clean and turn over XX
Deburr X
Replace XX
Chain sprocket
Check X
Replace X
Cooling inlets
Visual inspection X
Clean X
Battery Visual inspection X XX
Battery compartment
Clean X X
Check operation (eject battery) X
All accessible screws and nuts Retighten X
Safety labels Replace X