Instruction Manual

HTA 65, HTA 85
English
38
Battery
The machine may be operated only with
original STIHL AP and AR rechargeable
batteries.
Power tool running time is dependent on
the stored energy of the battery.
STIHL AP series and AR series
rechargeable batteries may be charged
only with original STIHL AL series
chargers.
STIHL AP series and AR series
rechargeable batteries may be charged
only with original STIHL AL series
chargers.
Charger
Chain Lubrication
Fully automatic speed-controlled oil
pump with reciprocating piston
Weight
Cutting Attachments
Rollomatic E Mini guide bars
Actual cutting length will be less than
listed bar length.
Saw chain 1/4" P
Chain sprocket
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
Specifications
Type: Lithium-ion
Designation: AP, AR
Rated capacity in Ah
1)
:
1
Rated capacity calculated pursuant
to IEC 61960. Usable energy
available to the operator will be
less.
See rating
plate
Stored energy in Wh
2)
:
2
The battery is marked with its
stored energy as provided by the
cell manufacturer. Usable energy
available to the operator will be
less.
See rating
plate
AL 100
Power supply: 120 V / 60 Hz
Rated current: 1.3 A
Power consumption: 75 W
Charge current: 1.6 A
Insulation: II, E (double
insulated)
AL 300
Power supply: 120 V / 60 Hz
Rated current: 4.7 A
Power consumption: 330 W
Charge current: 6.5 A
Insulation: II, E (double
insulated)
AL 500
Power supply: 120 V / 60 Hz
Rated current: 4.8 A
Power consumption: 570 W
Charge current: 12 A
Insulation: II, E (double
insulated)
Oil tank capacity: 0.105 l (3.6 fl.oz)
without guide bar, chain and battery
HTA 65: 3.4 kg (7.5 lbs)
HTA 85: 4.5 kg (9.9 lbs)
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 25, 30 cm (10, 12 in.)
Pitch: 1/4" P (6.35 mm)
Groove width: 1.1 mm (0.043 in.)
Low kickback STIHL saw chain (with
green label)
Picco Micro 3 (71 PM3) Type 3670
Pitch: 1/4" P (6.35 mm)
Drive link gauge: 1.1 mm (0.043 in.)
6-tooth for 1/4" P