Instruction Manual
Table Of Contents
- 1 Vorwort
- 2 Informationen zu dieser Gebrauchsanleitung
- 3 Übersicht
- 4 Sicherheitshinweise
- 5 Hoch-Entaster einsatzbereit machen
- 6 Akku laden und LEDs
- 7 Hoch-Entaster zusammenbauen
- 8 Akku einsetzen und herausnehmen
- 9 Hoch-Entaster einschalten und ausschalten
- 10 Hoch-Entaster und Akku prüfen
- 11 Mit dem Hoch-Entaster arbeiten
- 12 Nach dem Arbeiten
- 13 Transportieren
- 14 Aufbewahren
- 15 Reinigen
- 16 Warten
- 17 Reparieren
- 18 Störungen beheben
- 19 Technische Daten
- 20 Kombinationen der Führungsschienen und Sägeketten
- 21 Kombinationen aus Tragsystemen
- 22 Ersatzteile und Zubehör
- 23 Entsorgen
- 24 EU-Konformitätserklärung
- 25 Anschriften
- 26 Allgemeine Sicherheitshinweise für Elektrowerkzeuge
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing Pole Pruner for Operation
- 6 Charging the Battery, LEDs
- 7 Assembling the Pole Pruner
- 8 Removing and Fitting the Battery
- 9 Switching Pole Pruning On and Off
- 10 Checking Pole Pruner and Battery
- 11 Using the Pole Pruner
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Bar and Chain Combinations
- 21 Combinations of Carrying Systems
- 22 Spare Parts and Accessories
- 23 Disposal
- 24 EC Declaration of Conformity
- 25 General Power Tool Safety Warnings
- 1 Préface
- 2 Informations concernant la présente Notice d'emploi
- 3 Vue d'ensemble
- 4 Prescriptions de sécurité
- 4.1 Symboles d'avertissement
- 4.2 Utilisation conforme à la destination
- 4.3 Exigences posées à l'utilisateur
- 4.4 Vêtements et équipement
- 4.5 Aire de travail et voisinage
- 4.6 Bon état pour une utilisation en toute sécurité
- 4.7 Utilisation
- 4.8 Forces de réaction
- 4.9 Transport
- 4.10 Rangement
- 4.11 Nettoyage, entretien et réparation
- 5 Préparatifs avant l'utilisation de la perche élagueuse
- 6 Recharge de la batterie et DEL
- 7 Assemblage de la perche élagueuse
- 8 Introduction et extraction de la batterie
- 9 Mise en marche et arrêt de la perche élagueuse
- 10 Contrôle de la perche élagueuse et de la batterie
- 11 Travail avec la perche élagueuse
- 12 Après le travail
- 13 Transport
- 14 Rangement
- 15 Nettoyage
- 16 Maintenance
- 17 Réparation
- 18 Dépannage
- 19 Caractéristiques techniques
- 20 Combinaisons de guide-chaînes et de chaînes de tronçonneuse
- 21 Combinaisons de systèmes de portage
- 22 Pièces de rechange et accessoires
- 23 Mise au rebut
- 24 Déclaration de conformité UE
- 25 Indications générales de sécurité pour outils électroportatifs
- 1 Premessa
- 2 Informazioni sulle presenti Istruzioni d’uso
- 3 Sommario
- 4 Avvertenze di sicurezza
- 5 Preparare lo sramatore lungo
- 6 Carica della batteria e LED
- 7 Assemblare lo sramatore lungo
- 8 Inserire e togliere la batteria
- 9 Accendere e spegnere lo sramatore lungo
- 10 Controllare lo sramatore lungo e la batteria
- 11 Lavorare con lo sramatore lungo
- 12 Dopo il lavoro
- 13 Trasporto
- 14 Conservazione
- 15 Pulizia
- 16 Manutenzione
- 17 Riparazione
- 18 Eliminazione dei guasti
- 19 Dati tecnici
- 20 Combinazioni di spranghe di guida e catene della sega
- 21 Combinazioni di sistemi di trasporto
- 22 Ricambi e accessori
- 23 Smaltimento
- 24 Dichiarazione di conformità UE
- 25 Avvertenze di sicurezza generali per attrezzi elettrici
- 1 Voorwoord
- 2 Informatie met betrekking tot deze handleiding
- 3 Overzicht
- 4 Veiligheidsinstructies
- 5 Hoogsnoeier klaar maken voor gebruik
- 6 Accu laden en leds
- 7 Hoogsnoeier samenstellen
- 8 Accu aanbrengen en wegnemen
- 9 Hoogsnoeier in- en uitschakelen
- 10 Hoogsnoeier en accu controleren
- 11 Met de hoogsnoeier werken
- 12 Na de werkzaamheden
- 13 Vervoeren
- 14 Opslaan
- 15 Reinigen
- 16 Onderhoud
- 17 Repareren
- 18 Storingen opheffen
- 19 Technische gegevens
- 20 Combinaties van zaagbladen en zaagkettingen
- 21 Combinaties van draagsystemen
- 22 Onderdelen en toebehoren
- 23 Milieuverantwoord afvoeren
- 24 EU-conformiteitsverklaring
- 25 Algemene veiligheidswaarschuwingen voor elektrische gereedschappen
0458-191-9621-A
45
English
3 Overview
3.2 STIHL HTA 86 Pole Pruner and Battery
1 Chain scabbard
The chain scabbard protects from contact with the saw
chain.
2 Handle hose
For holding and controlling the pole pruner.
3 Shaft
The shaft connects all components.
4 Oil tank cap
The oil filler cap closes the oil tank.
5 Battery compartment
The battery compartment holds the battery.
6 Control handle
For holding and controlling the pole pruner.
7Ergo lever
The Ergo lever holds the release slide in position when
the trigger is released.
8 Release slide
The release slide releases the trigger.
9 Carrying ring
For attaching the carrying system to the brushcutter.
10 Trigger
Switches the pole pruner on and off.
11 Locking lever
The locking lever holds the battery in the battery
compartment.
12 Clamp nut
Serves to adjust the length of shaft.
13 Chain sprocket
The chain sprocket drives the saw chain.
14 Tensioning screw
Adjusts the chain tension.
15 Saw chain
The saw chain cuts the wood.
16 Guide bar
The guide bar supports and guides the saw chain.
17 Limit stop
Holds the pole pruner against the wood while cutting.
15
11
10
8
9
7
6
13
12
14
16
17
18
19
5
4
1
21
22
#
20
2
3
0000097132_003