Instruction Manual
Table Of Contents
- 1 Vorwort
- 2 Informationen zu dieser Gebrauchsanleitung
- 3 Übersicht
- 4 Sicherheitshinweise
- 5 Hoch-Entaster einsatzbereit machen
- 6 Akku laden und LEDs
- 7 Hoch-Entaster zusammenbauen
- 8 Akku einsetzen und herausnehmen
- 9 Hoch-Entaster einschalten und ausschalten
- 10 Hoch-Entaster und Akku prüfen
- 11 Mit dem Hoch-Entaster arbeiten
- 12 Nach dem Arbeiten
- 13 Transportieren
- 14 Aufbewahren
- 15 Reinigen
- 16 Warten
- 17 Reparieren
- 18 Störungen beheben
- 19 Technische Daten
- 20 Kombinationen der Führungsschienen und Sägeketten
- 21 Kombinationen aus Tragsystemen
- 22 Ersatzteile und Zubehör
- 23 Entsorgen
- 24 EU-Konformitätserklärung
- 25 Anschriften
- 26 Allgemeine Sicherheitshinweise für Elektrowerkzeuge
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing Pole Pruner for Operation
- 6 Charging the Battery, LEDs
- 7 Assembling the Pole Pruner
- 8 Removing and Fitting the Battery
- 9 Switching Pole Pruning On and Off
- 10 Checking Pole Pruner and Battery
- 11 Using the Pole Pruner
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Bar and Chain Combinations
- 21 Combinations of Carrying Systems
- 22 Spare Parts and Accessories
- 23 Disposal
- 24 EC Declaration of Conformity
- 25 General Power Tool Safety Warnings
- 1 Préface
- 2 Informations concernant la présente Notice d'emploi
- 3 Vue d'ensemble
- 4 Prescriptions de sécurité
- 4.1 Symboles d'avertissement
- 4.2 Utilisation conforme à la destination
- 4.3 Exigences posées à l'utilisateur
- 4.4 Vêtements et équipement
- 4.5 Aire de travail et voisinage
- 4.6 Bon état pour une utilisation en toute sécurité
- 4.7 Utilisation
- 4.8 Forces de réaction
- 4.9 Transport
- 4.10 Rangement
- 4.11 Nettoyage, entretien et réparation
- 5 Préparatifs avant l'utilisation de la perche élagueuse
- 6 Recharge de la batterie et DEL
- 7 Assemblage de la perche élagueuse
- 8 Introduction et extraction de la batterie
- 9 Mise en marche et arrêt de la perche élagueuse
- 10 Contrôle de la perche élagueuse et de la batterie
- 11 Travail avec la perche élagueuse
- 12 Après le travail
- 13 Transport
- 14 Rangement
- 15 Nettoyage
- 16 Maintenance
- 17 Réparation
- 18 Dépannage
- 19 Caractéristiques techniques
- 20 Combinaisons de guide-chaînes et de chaînes de tronçonneuse
- 21 Combinaisons de systèmes de portage
- 22 Pièces de rechange et accessoires
- 23 Mise au rebut
- 24 Déclaration de conformité UE
- 25 Indications générales de sécurité pour outils électroportatifs
- 1 Premessa
- 2 Informazioni sulle presenti Istruzioni d’uso
- 3 Sommario
- 4 Avvertenze di sicurezza
- 5 Preparare lo sramatore lungo
- 6 Carica della batteria e LED
- 7 Assemblare lo sramatore lungo
- 8 Inserire e togliere la batteria
- 9 Accendere e spegnere lo sramatore lungo
- 10 Controllare lo sramatore lungo e la batteria
- 11 Lavorare con lo sramatore lungo
- 12 Dopo il lavoro
- 13 Trasporto
- 14 Conservazione
- 15 Pulizia
- 16 Manutenzione
- 17 Riparazione
- 18 Eliminazione dei guasti
- 19 Dati tecnici
- 20 Combinazioni di spranghe di guida e catene della sega
- 21 Combinazioni di sistemi di trasporto
- 22 Ricambi e accessori
- 23 Smaltimento
- 24 Dichiarazione di conformità UE
- 25 Avvertenze di sicurezza generali per attrezzi elettrici
- 1 Voorwoord
- 2 Informatie met betrekking tot deze handleiding
- 3 Overzicht
- 4 Veiligheidsinstructies
- 5 Hoogsnoeier klaar maken voor gebruik
- 6 Accu laden en leds
- 7 Hoogsnoeier samenstellen
- 8 Accu aanbrengen en wegnemen
- 9 Hoogsnoeier in- en uitschakelen
- 10 Hoogsnoeier en accu controleren
- 11 Met de hoogsnoeier werken
- 12 Na de werkzaamheden
- 13 Vervoeren
- 14 Opslaan
- 15 Reinigen
- 16 Onderhoud
- 17 Repareren
- 18 Storingen opheffen
- 19 Technische gegevens
- 20 Combinaties van zaagbladen en zaagkettingen
- 21 Combinaties van draagsystemen
- 22 Onderdelen en toebehoren
- 23 Milieuverantwoord afvoeren
- 24 EU-conformiteitsverklaring
- 25 Algemene veiligheidswaarschuwingen voor elektrische gereedschappen
0458-191-9621-A
46
English
4 Safety Precautions
18 Chain sprocket cover
Covers the chain sprocket and secures the guide bar to
the pole pruner.
19 Nut
Secures the chain sprocket cover to the pole pruner.
20 LEDs
The LEDs indicate the state of charge of the battery and
any faults.
21 Battery
Supplies power to the pole pruner.
22 Button
The button activates the LEDs on the battery.
# Rating plate with machine number
3.3 Icons
Meanings of the icons that may be on the pole pruner and
battery:
4.1 Warning Symbols
Meanings of warning symbols on the pole pruner or battery:
The clamp nut is unscrewed in this position. The shaft
can be extended.
The clamp nut is locked in this position. The shaft
cannot be extended.
This icon marks the saw chain oil tank.
This icon shows the direction of rotation of the
chain.
Rotate in this direction to increase the saw chain
tension
1 LED lights up red. The battery is too warm or
too cold.
4 LEDs flashing red. There is a fault in the
battery.
Guaranteed sound power level in accordance
with Directive 2000/14/EC in dB(A) for the
purpose of comparing the sound emissions of
products.
The information next to the symbol indicates the
energy content of the battery according to the cell
manufacturer’s specification. The energy content
available in operation is lower.
Do not dispose of the product with domestic waste.
4 Safety Precautions
Observe safety notices and take the necessary
precautions.
Read, understand and keep the User Manual.
Wear safety glasses and a hard hat.
Wear safety boots.
L
W
A