STIHL KB-MM, KW-MM Instruction Manual
English MultiSystem Guide to Using this Manual Safety Precautions and Working Techniques Using the Unit Approved MultiEngines Mounting the MultiTool Starting / Stopping the Engine Storing the Machine Maintenance and Care Minimize Wear and Avoid Damage Main Parts Specifications Maintenance and Repairs Disposal EC Declaration of Conformity 2 2 2 6 8 9 10 11 11 12 13 14 14 15 15 Dear Customer, Thank you for choosing a quality engineered STIHL product.
English MultiSystem Guide to Using this Manual Pictograms All the pictograms attached to the machine are shown and explained in this manual. + Symbols in text WARNING + 469BA028 KN Warning where there is a risk of an accident or personal injury or serious damage to property. In the STIHL MultiSystem, various MultiEngines and MultiTools are combined to form a machine. In this Instruction Manual, the functional unit of MultiEngine and MultiTool is referred to as a machine.
English technically identical. If you have any questions in this respect, consult your dealer. Use only high quality parts and accessories. in order to avoid the risk of accidents and damage to the machine. STIHL recommends the use of original STIHL tools and accessories. They are specifically designed to match the product and meet your performance requirements. The deflector on this power tool cannot protect the operator from all objects thrown by the attachment (stones, glass, wire, etc.).
English your machine and make proper adjustments or repairs – see MultiEngine user manual. Check the gearbox for correct position, adjust if necessary. This helps reduce the risk of injury from the MultiTool rotating in the wrong direction. To reduce the risk of injury from thrown objects or contact with the attachment, never operate the unit without a properly mounted deflector designed specifically for the unit and the attachment.
English Be extremely cautious when pulling the power tool towards you because of the risk of injury from contact with the rotating attachment. Do not touch the attachment while the engine is running. If the attachment becomes jammed by an obstruction, switch off the engine immediately before attempting to remove the obstruction – otherwise, risk of injury! Make sure you always have good balance and secure footing. Be extremely cautious when changing direction with the power tool – especially on slopes.
English Bristle Brush Using the Unit Sweeping Attachments MultiTools for sweeping and cleaning are available in 2 versions: KB-MM bristle brush KW-MM PowerSweep Preparations 486BA002 KN 486BA006 KN If the surface to be cleaned is dry, spray it with water to reduce the amount of dust created. WARNING Clear away all obstacles and solid objects from the work area.
English N 487BA002 KN 486BA004 KN PowerSweep Always hold and guide the tool at a shallow angle. N WARNING WARNING The steeper the angle shown above, the more difficult it is to control the tool. The steeper the angle shown above, the more difficult it is to control the tool. WARNING The bristle brush pushes back towards the operator.
English Refer to "Mounting the MultiTool" for mounting instructions. Set of Wheels (Special Accessory) Approved MultiEngines Only use MultiEngines supplied by STIHL or expressly approved by STIHL for use with the MultiTool. 486BA006 KN This MultiTool may only be used in combination with the STIHL MM 56 MultiEngine. The set of wheels simplifies handling of the sweeping attachment – see notes on "Wheels" in MultiEngine instruction manual.
English Mounting the MultiTool NOTICE It must not be possible to rotate the gearbox on the drive tube. Removing Existing MultiTools Mounting the MultiTool WARNING The axle (1) must be above the shaft (2). Direction of rotation (3) of MultiTool. 1 N N Remove the hitch pins and pull the MultiTools (if fitted) off the axle – see also "Mounting the MultiTool" in the instruction manual of the other MultiTool. Clean the gearbox if necessary. N Loosen clamp screws on gearbox.
English Starting / Stopping the Engine WARNING Always mount both sweeper drums. Starting the Engine 486BA009 KN 6 N Push the bristle brush (5) onto the axle (2) . N Insert the hitch pin (6) in the hole at the end of the axle and fold it flat. N Use the same procedure to mount the other bristle brush. WARNING Deflector extensions come standard with the bristle brush and are available as special accessories for the PowerSweep. 1 1 Always mount both bristle brushes.
English N N Check that the MultiTool is not touching the ground or any other obstacles. The unit must rest on the engine flange and the support on the frame. Make sure you have good balance and secure footing – as shown in the illustration. WARNING To reduce the risk of injury from contact with the rotating attachment, always stand to the side of the power tool, never in front of the attachment.
English Minimize Wear and Avoid Damage Observing the instructions in this manual and the MultiEngine manual helps reduce the risk of unnecessary wear and damage to the power tool. The power tool must be operated, maintained and stored with the due care and attention described in these instruction manuals. The user is responsible for all damage caused by non-observance of the safety precautions, operating and maintenance instructions.
English Main Parts Bristle Brush, PowerSweep 4 1 2 3 4 5 5 3 Grass shield Axle Hitch pin Right-hand deflector extension (standard with bristle brush, speciall accessory for PowerSweep) Left-hand deflector extension (standard with bristle brush, speciall accessory for PowerSweep) Bristle Brush 6 1 2 6 6 Roller brush PowerSweep 7 PowerSweep with sweeper belt 7 KB-MM, KW-MM 1 2 7 486BA020 KN 3 13
English Sound power level Lw to ISO 3744 Specifications MM 56 with KB-MM: MM 56 with KW-MM: Attachment Vibration level ahv,eq to EN 20643 KB-MM Two roller brushes Diameter: Working width: 250 mm 600 mm KW-MM Two sweeping drums Diameter: Working width: 102 dB(A) 102 dB(A) 270 mm 600 mm Weight MM 56 with KB-MM: MM 56 with KW-MM: Handle, left Handle, right 4.0 m/s2 4.1 m/s2 4.0 m/s2 4.1 m/s2 The K-factor in accordance with Directive 2006/42/EC is 2.
English Disposal EC Declaration of Conformity ANDREAS STIHL AG & Co. KG Badstr. 115 D-71336 Waiblingen Observe all country-specific waste disposal rules and regulations. Done at Waiblingen, 03.02.2020 ANDREAS STIHL AG & Co. KG pp Germany 000BA073 KN declare under our sole responsibility that STIHL products must not be thrown in the garbage can. Take the product, accessories and packaging to an approved disposal site for environmentfriendly recycling.
English 16 KB-MM, KW-MM
0458-486-0121 englisch G www.stihl.
