Operation Manual

KM 94 R
English
21
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required
Complete machine
Visual inspection (condition, leaks) XX
Clean X
Replace any damaged parts X
Control handle Check operation XX
Air filter
Visual inspection XX
Clean filter housing X
Replace felt filter
1)
XX
Fuel tank Clean XXX
Manual fuel pump (if fitted)
Check X
Have repaired by servicing dealer
2)
X
Pickup body in fuel tank
Have checked by servicing dealer
2)
X
Have replaced by servicing dealer
2)
XXX
Carburetor
Check idle adjustment – the working/cut-
ting attachment must not run
XX
Adjust idle speed X
Spark plug
Adjust electrode gap X
Replace after every 100 operating hours
Cooling inlets
Visual inspection X
Clean X
Cylinder fins Have cleaned by servicing dealer
2)
X
Spark arresting screen in muffler
Check XX
Clean or replace XX
Spacer molded to shroud
Check
3)
X
Have shroud replaced by servicing
dealer
2)
XX