Owner's Manual

MS 362 C
English
54
Chain sprocket
To ensure compliance with the kickback
properties required in Section 5.11 of
ANSI B 175.1-2000, only use
replacement chains that, when used
with this specific powerhead, comply
with Section 5.11 of the ANSI standard
or are classed as "reduced kickback"
chains according to ANSI B 175.1-2000.
Please ask your STIHL dealer for the
latest recommendations on new
bar/chain combinations developed after
publication of this instruction manual.
Contact your STIHL dealer for
information regarding special
accessories that may be available for
your product.
Please enter your saw model, serial
number as well as the part numbers of
the guide bar and saw chain in the
spaces provided. This will make re-
ordering simpler.
The guide bar and saw chain are subject
to normal wear and tear. When
purchasing these parts, always quote
the saw model, the part numbers and
names of the parts.
See "Specifications" in this manual for
the recommended reduced kickback
cutting attachments.
STIHL E Super guide bars (with yellow
label)
Bar lengths
(3/8"):
16, 18, 20, 25 in (40, 45,
50, 63 cm)
Groove width: 0.050 in.
(1.3 mm)/0.063 in.
(1.6 mm)
7-tooth for 3/8" (rim sprocket)
Special Accessories Ordering Spare Parts
Model
Serial number
Guide bar part number
Chain part number