Instruction Manual
Table Of Contents
- STIHL MS 400 C-M
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing the Saw for Operation
- 6 Assembling the Saw
- 7 Engaging and Disengaging the Chain Brake
- 8 Mixing Fuel and Refueling the Chainsaw
- 9 Starting and Stopping the Engine
- 10 Checking the Saw
- 11 Operating the Saw
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Bar and Chain Combinations
- 21 Spare Parts and Accessories
- 22 Disposal
- 23 EC Declaration of Conformity
20 Bar and Chain Combinations
20.1 STIHL MS 400 C-M Chainsaw
Pitch Drive link
gauge/groove
width
Length Guide bar Nose
sprocket
teeth
Number of
drive links
Saw chain
3/8” 1.6 mm
40 cm
Rollomatic E
11 60
36 RS (Type
3621)
36 RS3 (Type
3626)
36 RM (Type
3652)
36 RM3 (Type
3664)
36 RD3 (Type
3683)
Rollomatic ES
45 cm
Rollomatic E
11 66
Rollomatic ES
50 cm
Rollomatic E
11
72
Rollomatic ES
Rollomatic ES
Light
Duromatic -
55 cm Rollomatic ES 11 76
63 cm
Rollomatic E
11 84
Rollomatic ES
Rollomatic ES
Light
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. Actual cut‐
ting length of a guide bar may be less than the specified length.
21 Spare Parts and Accesso‐
ries
21.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
22 Disposal
22.1 Disposing of Chainsaw
Information on disposal is available from STIHL
servicing dealers.
► Dispose of the chainsaw, guide bar, saw
chain, fuel mix, gasoline, two-stroke engine oil,
accessories and packaging in accordance with
local regulations and environmental require‐
ments.
23 EC Declaration of Con‐
formity
23.1 STIHL MS 400 C-M Chainsaw
ANDREAS STIHL AG & Co. KG
Badstrasse 115
D-71336 Waiblingen
Germany
declare in exclusive responsibility that
–
Category: Chainsaw
–
Make: STIHL
–
Model: MS 400 C-M
–
Serial identification: 1140
–
Displacement: 66.8 cc
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion: EN ISO 11681‑1, EN 55012 and
EN 61000‑6‑1.
The EC type examination in accordance with
Directive 2006/42/EC Article 12.3(b) was carried
out at: DPLF, Deutsche Prüf- und Zertifizierungs‐
stelle für Land- und Forsttechnik GbR (NB 0363),
Spremberger Straße 1, 64823 Groß‑Umstadt,
Germany
–
Certification number K-EG-2018/8494
English 20 Bar and Chain Combinations
28 0458-788-0121-B. VA0.L20.