Operation Manual
Table Of Contents
- Secondary Chain Braking System
- Guide to Using this Manual
- Some Important Safety Precautions for Chain Saw Users
- Safety Precautions and Working Techniques
- Mounting the Bar and Chain (Side chain tensioner)
- Mounting the Bar and Chain (Quick Chain Tensioner)
- Tensioning the Saw Chain (Side chain tensioner)
- Tensioning the Saw Chain (Quick chain tensioner)
- Checking Chain Tension
- Fuel
- Fueling
- Chain Lubricant
- Filling Chain Oil Tank
- Checking Chain Lubrication
- Chain Brake
- Winter Operation
- Information Before You Start
- Starting / Stopping the Engine
- Operating Instructions
- Taking Care of Guide Bar
- Air Filter System
- Cleaning the Air Filter
- Motor Management
- Adjusting the Carburetor
- Spark Arresting Screen* in Muffler
- Checking the Spark Plug
- Replacing Starter Rope and Rewind Spring
- Storing the Machine
- Checking and Replacing Chain Sprocket
- Maintaining and Sharpening Saw Chain
- Maintenance Chart
- Main Parts of the Saw
- Specifications
- Special Accessories
- Ordering Spare Parts
- Maintenance and Repairs
- STIHL Incorporated Federal Emission Control Warranty Statement
- Trademarks
- Contents
- BA_SE_122_003_31_04.pdf
- Sistema de freno de la cadena auxiliar
- Guía para el uso de este manual
- Algunas importantes medidas de seguridad para los usuarios de la motosierra
- Medidas de seguridad y técnicas de manejo
- Montaje de la barra y la cadena (tensor lateral de la cadena)
- Montaje de la barra y la cadena (Tensor rápido de la cadena)
- Tensado de la cadena de sierra (Tensor lateral de la cadena)
- Tensado de la cadena de sierra (Tensor rápido de la cadena)
- Revisión de tensión de la cadena
- Combustible
- Llenado de combustible
- Lubricante de la cadena
- Llenado del tanque de aceite de la cadena
- Revisión de la lubricación de la cadena
- Freno de la cadena
- Manejo durante el invierno
- Información previa al arranque
- Arranque / Parada del motor
- Instrucciones de manejo
- Cuidado de la barra guía
- Sistema de filtro de aire
- Limpieza del filtro de aire
- Manejo del motor
- Ajuste del carburador
- Chispero* en silenciador
- Revisión de la bujía
- Sustitución de la cuerda de arranque y resorte de rebobinado
- Almacenamiento de la máquina
- Revisión y sustitución de la rueda dentada de cadena
- Mantenimiento y afilado de la cadena de sierra
- Tabla de mantenimiento
- Componentes principales de la sierra
- Especificaciones
- Accesorios especiales
- Pedido de piezas de repuesto
- Mantenimiento y reparaciones
- Declaración de garantía de STIHL Incorporated sobre sistemas de control de emisiones según normas...
- Marcas comerciales
- Contenido
- 1.pdf
- BA_SE_188_004_01_02.pdf
- Secondary Chain Braking System
- Guide to Using this Manual
- Some Important Safety Precautions for Chain Saw Users
- Safety Precautions and Working Techniques
- Mounting the Bar and Chain
- Tensioning the Saw Chain
- Checking Chain Tension
- Fuel
- Fueling
- Chain Lubricant
- Filling Chain Oil Tank
- Checking Chain Lubrication
- Chain Brake
- Winter Operation
- Information Before You Start
- Starting / Stopping the Engine
- Operating Instructions
- Oil Quantity Control *
- Taking Care of Guide Bar
- Air Filter System
- Removing the Air Filter
- Cleaning Standard Filter
- Cleaning HD Filter
- Motor Management
- Adjusting the Carburetor
- Spark Arresting Screen in Muffler
- Checking the Spark Plug
- Replacing Starter Rope and Rewind Spring
- Storing the Machine
- Checking and Replacing Chain Sprocket
- Maintaining and Sharpening Saw Chain
- Maintenance Chart
- Main Parts of the Saw
- Specifications
- Special Accessories
- Ordering Spare Parts
- Maintenance and Repairs
- STIHL Incorporated Federal Emission Control Warranty Statement
- Trademarks
- Contents
- BA_SE_188_004_31_02.pdf
- Sistema de freno de la cadena auxiliar
- Guía para el uso de este manual
- Algunas importantes medidas de seguridad para los usuarios de la motosierra
- Medidas de seguridad y técnicas de manejo
- Montaje de la barra y la cadena
- Tensión de la cadena de sierra
- Revisión de tensión de la cadena
- Combustible
- Llenado de combustible
- Lubricante de la cadena
- Llenado del tanque de aceite de la cadena
- Revisión de la lubricación de la cadena
- Freno de la cadena
- Manejo durante el invierno
- Información previa al arranque
- Arranque / parada del motor
- Instrucciones de manejo
- Control de cantidad de aceite *
- Cuidado de la barra guía
- Sistema de filtro de aire
- Retiro del filtro de aire
- Limpieza del filtro estándar
- Limpieza del filtro HD
- Manejo del motor
- Ajuste del carburador
- Chispero en el silenciador
- Revisión de la bujía
- Sustitución de la cuerda de arranque y resorte de rebobinado
- Almacenamiento de la máquina
- Revisión y sustitución de la rueda dentada de cadena
- Mantenimiento y afilado de la cadena de sierra
- Tabla de mantenimiento
- Componentes principales de la sierra
- Especificaciones
- Accesorios especiales
- Pedido de piezas de repuesto
- Mantenimiento y reparaciones
- Declaración de garantía de STIHL Incorporated sobre sistemas de control de emisiones según normas...
- Marcas comerciales
- Contenido
- BA_SE_188_004_01_02.pdf
- 3.pdf
- BA_SE_188_004_01_02.pdf
- Secondary Chain Braking System
- Guide to Using this Manual
- Some Important Safety Precautions for Chain Saw Users
- Safety Precautions and Working Techniques
- Mounting the Bar and Chain
- Tensioning the Saw Chain
- Checking Chain Tension
- Fuel
- Fueling
- Chain Lubricant
- Filling Chain Oil Tank
- Checking Chain Lubrication
- Chain Brake
- Winter Operation
- Information Before You Start
- Starting / Stopping the Engine
- Operating Instructions
- Oil Quantity Control *
- Taking Care of Guide Bar
- Air Filter System
- Removing the Air Filter
- Cleaning Standard Filter
- Cleaning HD Filter
- Motor Management
- Adjusting the Carburetor
- Spark Arresting Screen in Muffler
- Checking the Spark Plug
- Replacing Starter Rope and Rewind Spring
- Storing the Machine
- Checking and Replacing Chain Sprocket
- Maintaining and Sharpening Saw Chain
- Maintenance Chart
- Main Parts of the Saw
- Specifications
- Special Accessories
- Ordering Spare Parts
- Maintenance and Repairs
- STIHL Incorporated Federal Emission Control Warranty Statement
- Trademarks
- Contents
- BA_SE_188_004_31_02.pdf
- Sistema de freno de la cadena auxiliar
- Guía para el uso de este manual
- Algunas importantes medidas de seguridad para los usuarios de la motosierra
- Medidas de seguridad y técnicas de manejo
- Montaje de la barra y la cadena
- Tensión de la cadena de sierra
- Revisión de tensión de la cadena
- Combustible
- Llenado de combustible
- Lubricante de la cadena
- Llenado del tanque de aceite de la cadena
- Revisión de la lubricación de la cadena
- Freno de la cadena
- Manejo durante el invierno
- Información previa al arranque
- Arranque / parada del motor
- Instrucciones de manejo
- Control de cantidad de aceite *
- Cuidado de la barra guía
- Sistema de filtro de aire
- Retiro del filtro de aire
- Limpieza del filtro estándar
- Limpieza del filtro HD
- Manejo del motor
- Ajuste del carburador
- Chispero en el silenciador
- Revisión de la bujía
- Sustitución de la cuerda de arranque y resorte de rebobinado
- Almacenamiento de la máquina
- Revisión y sustitución de la rueda dentada de cadena
- Mantenimiento y afilado de la cadena de sierra
- Tabla de mantenimiento
- Componentes principales de la sierra
- Especificaciones
- Accesorios especiales
- Pedido de piezas de repuesto
- Mantenimiento y reparaciones
- Declaración de garantía de STIHL Incorporated sobre sistemas de control de emisiones según normas...
- Marcas comerciales
- Contenido
- BA_SE_188_004_01_02.pdf
17MS 441 C
English / USA
a) Saws with a displacement of less
than 3.8 cubic inches (62 cm³)
– must, in their original condition,
meet a 45° computer derived
kickback angle when equipped with
certain cutting attachments,
– and must be equipped with at least
two devices to reduce the risk of
kickback injury, such as a chain
brake, low kickback chain, reduced
kickback bar, etc.
b) Saws with a displacement of
3.8 cubic inches (62 cm³) and above
– must be equipped with at least one
device designed to reduce the risk
of kickback injury such as a chain
brake, low kickback chain, reduced
kickback bar, etc.
The computer derived angles for saws
below 3.8 cubic inch (62 cm³)
displacement are measured by applying
a computer program to test results from
a kickback test machine.
!Warning!
The computer derived angles of § 5.11
of ANSI B 175.1-2000 may bear no
relationship to actual kickback bar
rotation angles that may occur in real life
cutting situations.
In addition, features designed to reduce
kickback injuries may lose some of their
effectiveness when they are no longer in
their original condition, especially if they
have been improperly maintained.
Compliance with § 5.11 of ANSI B 175.1-
2000 does not automatically mean that
in a real life kickback the bar and chain
will rotate at most 45°.
!Warning!
In order for powerheads below 3.8 cubic
inch (62 cm³) displacement to comply
with the computed kickback angle
requirements of § 5.11 of ANSI B 175.1-
2000 use only the following cutting
attachments:
– bar and chain combinations listed
as complying in the "Specifications"
section of the instruction manual or
– other replacement bar and chain
combinations marked in
accordance with the standard for
use on the powerhead or
– replacement chain designated
"low kickback saw chain.“
See the section on "Low kickback saw
chain and reduced kickback bars."
Devices for reducing the risk of
kickback injury
STIHL recommends the use of the
STIHL Quickstop chain brake on your
powerhead with green labeled reduced
kickback bars and low kickback chains.
!Warning!
To reduce the risk of injury, never use a
saw if the chain brake does not function
properly. Take the saw to your local
STIHL servicing dealer. Do not use the
saw until the problem has been rectified.
STIHL Quickstop chain brake
STIHL has developed a chain stopping
system designed to reduce the risk of
injury in certain kickback situations. It is
called a Quickstop chain brake. The
Quickstop chain brake is standard
equipment on your STIHL chainsaw.