Owner's Manual

26
English / USA
MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C
Fitting the Chain
: Wear work gloves to protect your
hands.
: Fit the chain, start at the bar nose,
pay attention to position of
tensioning gear and the cutting
edges.
: Turn tensioning gear (9) clockwise
as far as stop.
: Disengage the chain brake: Push
hand guard (10) toward the front
handle.
: Turn the guide bar so that the
tensioning gear is facing you.
: Fit the chain over the sprocket (11)
and slip the guide bar over the collar
screw (12), the head of the rear
collar screw must locate in the slot.
: Make sure the drive link tangs
engage the bar groove (see arrow)
and then rotate tensioning gear
counterclockwise as far as stop.
9
135BA008 KN
10
100BA008 KN
11
12
135BA010 KN
100BA009 KN