Instruction Manual
Table Of Contents
- STIHL RE 150 PLUS, 170 PLUS
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Safety instructions - Accessories
- 6 Preparing the pressure washer for operation
- 7 Assembling the pressure washer
- 8 Connecting to a water source
- 9 Connecting the pressure washer to the power supply
- 10 Switching the pressure washer on and off
- 11 Operating the pressure washer
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Spare Parts and Accessories
- 21 Disposal
- 22 EC Declaration of Conformity
Pulling or carrying the pressure washer
1
2
1
0000-GXX-9859-A0
► Pull pressure washer using handle (1).
► Carry the pressure washer by the handle (1)
and the carrying handle (2).
Transporting the pressure washer in a vehicle
► Secure the pressure washer so that it cannot
topple over and cannot move.
► If the pressure washer cannot be transported
in a frost-proof environment: Protect pressure
washer using antifreeze.
14 Storing
14.1 Storing the pressure washer
► Switch off pressure washer and unplug mains
plug from the socket.
► The pressure washer should be stored in such
a way that the following conditions are fulfilled:
–
The pressure washer is out of the reach of
children.
–
The pressure washer is clean and dry.
–
The pressure washer is in an enclosed
room.
–
The pressure washer is in a temperature
range above 0 °C.
–
If the pressure washer cannot be protected
from frost in storage: Protect the pressure
washer with antifreeze.
15 Cleaning
15.1 Cleaning the high-pressure
washer and accessories
► Switch off the high-pressure washer and pull
the mains plug out of the socket.
► Clean the high-pressure washer, high-pres‐
sure hose, spray gun and accessories with a
damp cloth.
► Clean the connectors and couplings on the
high-pressure washer, high-pressure hose and
spray gun with a damp cloth.
► Clean vents with a paintbrush.
15.2 Cleaning nozzle and spray
lance
0000098883_A1
► Rinse the nozzle and spray lance under run‐
ning water and dry with a cloth.
0000-GXX-4370-A0
► If the nozzle is clogged: Clean the nozzle with
the cleaning pin.
15.3 Cleaning the water intake
screen
2
1
0000-GXX-9858-A0
► Unscrew the connector (1) of the water con‐
nection.
► Pull water intake screen (2) out of the water
connection.
► Rinse out the water intake screen (2) under
running water.
► Insert water intake screen (2) into water con‐
nection.
► Attach the connector (1) and tighten it by
hand.
15.4 Cleaning the water filter
The water filter must be disassembled to clean it.
English 14 Storing
20 0458-663-0121-B