Instruction Manual
Table Of Contents
- STIHL RE 150 PLUS, 170 PLUS
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Safety instructions - Accessories
- 6 Preparing the pressure washer for operation
- 7 Assembling the pressure washer
- 8 Connecting to a water source
- 9 Connecting the pressure washer to the power supply
- 10 Switching the pressure washer on and off
- 11 Operating the pressure washer
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Spare Parts and Accessories
- 21 Disposal
- 22 EC Declaration of Conformity
–
Max. permissible pressure (p max.): 18 MPa
(180 bar)
–
Max. water supply pressure (p in max.): 1 MPa
(10 bar)
–
Max. water throughput (Q max): 10.2 l/min
(612 l/h)
–
Minimum water throughput (Q min.): 9.0 l/min
(540 l/h)
–
Maximum kickback force: 21 N
–
Max. suction lift: 0.5 m
–
Max. water temperature in pressure mode
(t in max): 60 °C
–
Max. water temperature in suction mode:
20 °C
sample inspection
–
Length: 383 mm
–
Width: 380 mm
–
Maximum height: 981 mm
–
Minimum height: 792 mm
–
Length of high-pressure hose: 12 m
–
Weight (m) with accessory attached: 31 kg
Version 230 V / 50 Hz (GB)
–
Fuse (characteristic "C" or "K"): 13 A
–
Power consumption: (EU) 2019/1781 §2(2) (j):
2.8 kW
–
Maximum permitted network impedance: 0.32
Ohm
–
protection class: I
–
Degree of of electrical protection: IPX5
–
Working pressure (p): 12.8 MPa (128 bar)
–
Max. permissible pressure (p max.): 18 MPa
(180 bar)
–
Max. water supply pressure (p in max.): 1 MPa
(10 bar)
–
Max. water throughput (Q max): 10.2 l/min
(612 l/h)
–
Minimum water throughput (Q min.): 9.5 l/min
(570 l/h)
–
Maximum kickback force: 20 N
–
Max. suction lift: 0.5 m
–
Max. water temperature in pressure mode
(t in max): 60 °C
–
Max. water temperature in suction mode:
20 °C
sample inspection
–
Length: 383 mm
–
Width: 380 mm
–
Maximum height: 981 mm
–
Minimum height: 792 mm
–
Length of high-pressure hose: 12 m
–
Weight (m) with accessory attached: 31 kg
Parameters dependent on pressure have been
measured at an inlet pressure of 0.3 MPa (3
bar).
19.2 Pressure washer STIHL RE
170 PLUS
Version 230 V / 50 Hz
–
Fuse (characteristic "C" or "K"): 16 A
–
Power consumption: (EU) 2019/1781 §2(2) (j):
3.3 kW
–
Maximum permitted network impedance: 0.45
Ohm
–
protection class: I
–
Degree of of electrical protection: IPX5
–
Working pressure (p): 15 MPa (150 bar)
–
Max. permissible pressure (p max.): 18 MPa
(180 bar)
–
Max. water supply pressure (p in max.): 1 MPa
(10 bar)
–
Max. water throughput (Q max): 10.8 l/min
(648 l/h)
–
Minimum water throughput (Q min.): 9.5 l/min
(570 l/h)
–
Maximum kickback force: 24 N
–
Max. suction lift: 0.5 m
–
Max. water temperature in pressure mode
(t in max): 60 °C
–
Max. water temperature in suction mode:
20 °C
sample inspection
–
Length: 383 mm
–
Width: 380 mm
–
Maximum height: 981 mm
–
Minimum height: 792 mm
–
Length of high-pressure hose: 12 m
–
Weight (m) with accessory attached: 31 kg
Version 220-240 V / 50 Hz
–
Fuse (characteristic "C" or "K"): 10 A
–
Power consumption: (EU) 2019/1781 §2(2) (j):
2.2 kW
–
Maximum permitted network impedance: 0.45
Ohm
–
protection class: I
–
Degree of of electrical protection: IPX5
–
Working pressure (p): 12 MPa (120 bar)
–
Max. permissible pressure (p max.): 18 MPa
(180 bar)
–
Max. water supply pressure (p in max.): 1 MPa
(10 bar)
–
Max. water throughput (Q max): 8.7 l/min
(522 l/h)
–
Minimum water throughput (Q min.): 7.8 l/min
(468 l/h)
–
Maximum kickback force: 16 N
–
Max. suction lift: 0.5 m
–
Max. water temperature in pressure mode
(t in max): 60 °C
19 Specifications English
0458-663-0121-B 23